Vinyl sulfoxides

Keywords acetylenic sulfoxide, vinyl sulfoxide, acetylenic sulfinate, acetylenic sulfonate, 1-propene-1,3-sultone... 

The method employing the sequential alkylation and elimination of sulfoxides, reported above, has been successfully applied to the synthesis of dienes (Scheme 86, entry c), aryl alkenes and dienes (Scheme 47), vinyl sulfides, a,3-unsaturated sulfoxides, vinyl fluorides and vinyl chlorides (Scheme 96, entry a), and 1,1-dichloro-l-alkenes (Scheme 96, entry b). ... 

Battace, A., Zair, T., Doucet, H. and Santelli, M. (2006) Heck vinylations using vinyl sulfide, vinyl sulfoxide, vinyl sulfone, or vinyl sulfonate derivatives and aryl bromides catal3raed by a palladium complex derived from a tetraphosphine. Synthesis, 3495 505. 

Ethyl-4-methyl-l-(phenylsulfonyl)indole 4-Ethyl-7-methyl-l-phenylsulfonyl-l,5-dihydropyrano-[3,4-b]pyrrol-5-one phenyl vinyl sulfoxide 60 [3]... 

The reaction is of the 8 2 type and works best with primary and secondary alkyl halides Elimination is the only reaction observed with tertiary alkyl halides Aryl and vinyl halides do not react Dimethyl sulfoxide is the preferred solvent for this reaction but alcohols and water-alcohol mixtures have also been used... 

Phenyl vinyl sulfoxide is chiral Phenyl vinyl sulfone is achiral... 

Dimethylformamide [68-12-2] (DME) and dimethyl sulfoxide [67-68-5] (DMSO) are the most commonly used commercial organic solvents, although polymerizations ia y-butyrolactoae, ethyleae carboaate, and dimethyl acetamide [127-19-5] (DMAC) are reported ia the hterature. Examples of suitable inorganic salts are aqueous solutioas of ziac chloride and aqueous sodium thiocyanate solutions. The homogeneous solution polymerization of acrylonitrile foUows the conventional kinetic scheme developed for vinyl monomers (12) (see Polymers). 

Vinyl Pyrroles. Relatively new synthetic routes based on a one-pot reaction between ketoximes and acetjiene ia an alkaU metal hydroxide—dimethyl sulfoxide (DMSO) system have made vinyl pyrroles accessible. It requires no pyrrole precursors and uses cheap and readily available ketones (42). 

Low DS starch acetates ate manufactured by treatment of native starch with acetic acid or acetic anhydride, either alone or in pyridine or aqueous alkaline solution. Dimethyl sulfoxide may be used as a cosolvent with acetic anhydride to make low DS starch acetates ketene or vinyl acetate have also been employed. Commercially, acetic anhydride-aqueous alkaU is employed at pH 7—11 and room temperature to give a DS of 0.5. High DS starch acetates ate prepared by the methods previously detailed for low DS acetates, but with longer reaction time. 

Sulfoxides occur widely in small concentrations in plant and animal tissues, eg, aHyl vinyl sulfoxide [81898-53-5] in garlic oil and 2,2 -sulfinylbisethanol [3085-45-8] as fatty esters in the adrenal cortex (1,2). Homologous methyl sulfinyl alkyl isothiocyanates, which are represented by the formula CH3SO(CH2) NCS, where n = 3 [37791-20-1], 4 [4478-93-7], 5 [646-23-1], 8 [75272-81-0], 9 [39036-83-4], or 10 [39036-84-5], have been isolated from a number of mustard oils in which they occur as glucosides (3). Two methylsulfinyl amino acids have also been reported methionine sulfoxide [454-41-1] from cockroaches and the sulfoxide of i -methylcysteine, 3-(methylsulfinyl)alaiiine [4740-94-7]. The latter is the dominant sulfur-containing amino acid in turnips and may account in part for their characteristic odor (4). 

Polymerization and Spinning Solvent. Dimethyl sulfoxide is used as a solvent for the polymerization of acrylonitrile and other vinyl monomers, eg, methyl methacrylate and styrene (82,83). The low incidence of transfer from the growing chain to DMSO leads to high molecular weights. Copolymerization reactions of acrylonitrile with other vinyl monomers are also mn in DMSO. Monomer mixtures of acrylonitrile, styrene, vinyUdene chloride, methallylsulfonic acid, styrenesulfonic acid, etc, are polymerized in DMSO—water (84). In some cases, the fibers are spun from the reaction solutions into DMSO—water baths. 

Vinyl chloride reacts with sulfides, thiols, alcohols, and oximes in basic media. Reaction with hydrated sodium sulfide [1313-82-2] in a mixture of dimethyl sulfoxide [67-68-5] (DMSO) and potassium hydroxide [1310-58-3], KOH, yields divinyl sulfide [627-51-0] and sulfur-containing heterocycles (27). Various vinyl sulfides can be obtained by reacting vinyl chloride with thiols in the presence of base (28). Vinyl ethers are produced in similar fashion, from the reaction of vinyl chloride with alcohols in the presence of a strong base (29,30). A variety of pyrroles and indoles have also been prepared by reacting vinyl chloride with different ketoximes or oximes in a mixture of DMSO and KOH (31). 

Solubility. Poly(vinyl alcohol) is only soluble in highly polar solvents, such as water, dimethyl sulfoxide, acetamide, glycols, and dimethylformamide. The solubiUty in water is a function of degree of polymerization (DP) and hydrolysis (Fig. 4). Fully hydrolyzed poly(vinyl alcohol) is only completely soluble in hot to boiling water. However, once in solution, it remains soluble even at room temperature. Partially hydrolyzed grades are soluble at room temperature, although grades with a hydrolysis of 70—80% are only soluble at water temperatures of 10—40°C. Above 40°C, the solution first becomes cloudy (cloud point), followed by precipitation of poly(vinyl alcohol). 

Several cleaning formulations for specific uses contain unreacted polyamines. Examples include mixtures of ammonium alkylbenzenesulfonate, solvents, and PIP which give good cleaning and shine performance on mirrors and other hard surfaces without rinsing (305), and a hard-surface cleaner composed of a water-soluble vinyl acetate—vinyl alcohol copolymer, EDA, cyclohexanone [108-94-1] dimethyl sulfoxide [67-68-5] a surfactant, and water (306). TEPA, to which an average of 17 moles of ethylene oxide are added, improves the clay sod removal and sod antiredeposition properties of certain hquid laundry detergents (307). 

VV -values for bromoform and pyrrole, acidic liquids, against poly(vinyl chloride), an acidic polymer, and dimethyl sulfoxide, a predominantly basic liquid, against polyfmethyl methacrylate), a basic polymer, but large values for the acidic liquids against PMMA and the basic liquid against PVC. 2-Iodoethanol, a bifunctional liquid, showed appreciable -values with both polymers. Despite these results in line with expectations, other results based on wettability measurements are not so clear-cut. For example, Vrbanac [94] found significant apparent acid-base interactions of various aromatic liquids against poly(ethylene), presumably a neutral substrate. 

Verify, by making molecular models, that the bonds to sulfur are arranged in a trigonal pyramidal geometry in sulfoxides and in a tetrahedral geometry in sulfones. Is phenyl vinyl sulfoxide chiral What about phenyl vinyl sulfone ... 

Abbreviations aapy, 2-acetamidopyridine Aik, alkyl AN, acetoniuile Ar, aryl Bu, butyl cod, 1,5-cyclooctadiene COE, cyclooctene COT, cyclooctatetraene Cp, cyclopentadienyl Cp , penta-methylcyclopentadienyl Cy, cyclohexyl DME, 1,2-dimethoxyethane DME, dimethylformamide DMSO, dimethyl sulfoxide dmpe, dimethylphosphinoethane dppe, diphenylphosphinoethane dppm, diphenylphosphinomethane dppp, diphenylphosphinopropane Et, ethyl Ec, feirocenyl ind, inda-zolyl Me, methyl Mes, mesitylene nb, norbomene orbicyclo[2.2.1]heptene nbd, 2,5-norbomadiene OTf, uiflate Ph, phenyl PPN, bis(triphenylphosphoranylidene)ammonium Pi , propyl py, pyridine pz, pyrazolate pz, substituted pyi azolate pz , 3,5-dimethylpyrazolate quin, quinolin-8-olate solv, solvent tfb, teti afluorobenzobaiTelene THE, tetrahydrofuran THT, tetrahydrothiophene tmeda, teti amethylethylenediamine Tol, tolyl Tp, HB(C3H3N2)3 Tp , HB(3,5-Me2C3HN2)3 Tp, substituted hydrotiis(pyrazol-l-yl)borate Ts, tosyl tz, 1,2,4-triazolate Vin, vinyl. 

To control the stereochemistry of 1,3-dipolar cycloaddidon reacdons, chiral auxiliaries are introduced into either the dipole-part or dipolarophile A recent monograph covers this topic extensively ° therefore, only typical examples are presented here. Alkenes employed in asymmetric 1,3-cycloaddidon can be divided into three main groups (1) chiral allyhc alcohols, f2 chiral amines, and Hi chiral vinyl sulfoxides or vinylphosphine oxides. 

Methyl phenyl sulfide, see Thioanisole Methyl phenyl sulfoxide, 46, 78 from methylsulfinyl chloride and benzene with anhydrous alumi num chloride, 46, 80 Methyl vinyl ketone, reaction with 1-morpholino 1 cyclohexene, 45,... 

Attempts to prepare 5-vinyl-5F7-dibenz[b,/]azepine by alkylation of 5i/-dibenz[b,/]azepine with 2-chloroethyl-p-toluenesulfonate followed by dehydrochlorination, or by direct vinylation with acetylene under pressure in toluene or in dimethyl sulfoxide, have failed.194 Also, 5H-dibenz[b,/]azepine fails to react with acryloyl chloride, although the 5-acryloyl derivative 8 (R = COCH = CH2 mp 122 — 123 C) has been prepared in 65% yield by condensing dibenz-azepine 5 with 3-chloroacryloyl chloride, followed by dehydrochlorination of the product with l,8-diazabicyclo[5.4.0]undec-7-ene in dimethyl sulfoxide at 80-90°C.194... 

Besides simple alkyl-substituted sulfoxides, (a-chloroalkyl)sulfoxides have been used as reagents for diastereoselective addition reactions. Thus, a synthesis of enantiomerically pure 2-hydroxy carboxylates is based on the addition of (-)-l-[(l-chlorobutyl)sulfinyl]-4-methyl-benzene (10) to aldehydes433. The sulfoxide, optically pure with respect to the sulfoxide chirality but a mixture of diastereomers with respect to the a-sulfinyl carbon, can be readily deprotonated at — 55 °C. Subsequent addition to aldehydes afforded a mixture of the diastereomers 11A and 11B. Although the diastereoselectivity of the addition reaction is very low, the diastereomers are easily separated by flash chromatography. Thermal elimination of the sulfinyl group in refluxing xylene cleanly afforded the vinyl chlorides 12 A/12B in high chemical yield as a mixture of E- and Z-isomers. After ozonolysis in ethanol, followed by reductive workup, enantiomerically pure ethyl a-hydroxycarboxylates were obtained. 

As shown in Table 4, the same ratio of diastcreomeric sulfinylalkcnols was obtained from both (R)-(E)- and (/ )-(Z)-l-sulfinylalkenes (vinyl sulfoxides). This is explained by the fast cisjtrans isomerization of the organolithium intermediates in a strongly basic medium. Thus, EjZ mixtures of vinyl sulfoxides can be used without prior separation. 

---