Styrene stripping rate from

STRIPPING RATE OF RESIDUAL STYRENE MONOVER FROM LATEXES OF POLYSTYRENE AND SBR... 

In this article, the authors will present basic ex-periinental findings obtained from the stripping of styrene monomer in the SBR latex system in which a batch-type steam stripping apparatus was used. The observation of the stripping rate together with the consideration of the mass-transfer resistances will provide useful informations for the design purposes. 

The rate-based model gave a distillate with 0.023 mol % ethylbenzene and 0.0003 mol % styrene, and a bottoms product with essentially no methanol and 0.008 mol % toluene. Miirphree tray efficiencies for toluene, styrene, and ethylbenzene varied somewhat from tray to tray, but were confined mainly between 86 and 93 percent. Methanol tray efficiencies varied widely, mainly from 19 to 105 percent, with high values in the rectifying section and low values in the stripping section. Temperature differences between vapor and liquid phases leaving a tray were not larger than 5 F. 

In a study in which styrene was stripped from polystyrene, Latinen (1962) concluded that his theory correctly described the dependence of mass transfer rates on screw speed and flow rate. This conclusion was based on the agreement obtained between the measured and predicted exit concentration of styrene over a broad range of screw speeds and flow rates (Fig. 8). But, agreement between the theoretical expression and the experimental data was obtained using a diffusion coefficient of the order of 3 X 10 m sec , at 2(X)°C a value which is unrealistically high for this system. If the system ethylbenzene-polystyrene—which has a diffusion... 

---