Sodium ammonium orthophosphates hydroxide

Discussion. When a solution of an orthophosphate is treated with a large excess of ammonium molybdate solution in the presence of nitric acid at a temperature of 20-45 °C, a precipitate is obtained, which after washing is converted into ammonium molybdophosphate with the composition (NH4)3[P04,12Mo03]. This may be titrated with standard sodium hydroxide solution using phenolph-thalein as indicator, but the end point is rather poor due to the liberation of ammonia. If, however, the ammonium molybdate is replaced by a reagent containing sodium molybdate and quinoline, then quinoline molybdophosphate is precipitated which can be isolated and titrated with standard sodium hydroxide ... 

Eberlein and Kattner [194] described an automated method for the determination of orthophosphate and total dissolved phosphorus in the marine environment. Separate aliquots of filtered seawater samples were used for the determination orthophosphate and total dissolved phosphorus in the concentration range 0.01-5 xg/l phosphorus. The digestion mixture for total dissolved phosphorus consisted of sodium hydroxide (1.5 g), potassium peroxidisulfate (5 g) and boric acid (3 g) dissolved in doubly distilled water (100 ml). Seawater samples (50 ml) were mixed with the digestion reagent, heated under pressure at 115-120 °C for 2 h, cooled, and stored before determination in the autoanalyser system. For total phosphorus, extra ascorbic acid was added to the aerosol water of the autoanalyser manifold before the reagents used for the molybdenum blue reaction were added. For measurement of orthophosphate, a phosphate working reagent composed of sulfuric acid, ammonium molyb-... 

---