Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Semibatch reactors with heat exchangers

Transient CSTR, Batch, and Semibatch Reactors with Heat Exchanger—Ambient Temperature Not Spatially Uniform... [Pg.548]

Figure E9-4.1 Semibatch reactor with heat exchange. Figure E9-4.1 Semibatch reactor with heat exchange.
Section 13.3 Semibatch Reactors with a Heat Exchanger... [Pg.615]

In a semibatch emulsion homopolymer reactor, monomer is converted into polymer via a strongly exothermic reaction [2, 42]. First, water, surfactant, and initiator are loaded into the reactor. Then, monomer and heat are added to start the polymerization reaction, and after some period of time (in which the reaction sites have been formed), heat generated by the polymerization is removed in order to have an adequate reactor temperature control. Once the entire monomer load has been added, the temperature is increased to exhaust the monomer down to a small prespecified value. The monomer addition and heat exchange rates must be coordinated so that the batch is finished as soon as possible with adequate safety margin and... [Pg.619]

See other pages where Semibatch reactors with heat exchangers is mentioned: [Pg.614]    [Pg.617]    [Pg.1092]    [Pg.615]    [Pg.89]    [Pg.388]    [Pg.261]    [Pg.214]    [Pg.396]    [Pg.89]    [Pg.388]    [Pg.474]    [Pg.56]    [Pg.567]    [Pg.2146]    [Pg.1416]    [Pg.625]    [Pg.393]    [Pg.2132]    [Pg.89]    [Pg.241]    [Pg.258]    [Pg.70]    [Pg.2054]    [Pg.20]    [Pg.1206]    [Pg.404]    [Pg.357]    [Pg.388]    [Pg.625]   
See also in sourсe #XX -- [ Pg.615 , Pg.616 , Pg.617 , Pg.618 ]



SEARCH



Heat exchanger reactor

Heat-exchange reactor

Semibatch Reactors with a Heat Exchanger

Semibatch reactors

© 2024 chempedia.info