Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Rigid seals

A rigid sealed cylinder has seven molecules of neon (Ne). [Pg.130]

Self-Test 9.9A The initial partial pressures of nitrogen and hydrogen in a rigid, sealed vessel are 0.010 and 0.020 bar, respectively. The mixture is heated to a temperature at which K = 0.11 for N2(g) + 3 H2(g) 2 NH3(g). What are the equilibrium partial pressures of each substance in the reaction mixture ... [Pg.496]

British Standards Institution (1991) Specification for Steam Sterilizers for Aqueous Fluids in Rigid Sealed Containers BS 3970. London BSI. [Pg.409]

Caution Highly toxic Use a fume hood and avoid inhalation of dust or vapors. Seal the reaction vessel with parafilm. Do not use a rigid sealing cap, since cyanoborohydride will liberate hydrogen gas bubbles over time and may rupture the vessel. [Pg.782]

Historically, one of two techniques has typically been used to seal a planar SOFC stack glass joining or compressive sealing. Glass was originally used because it is simple to make and apply. The first requirement for a rigid seal is that the seal s... [Pg.214]

In an experiment pure AsH3(g) was placed in an empty, rigid, sealed flask at a pressure of 392.0 torr. After 48 h the pressure in the flask was observed to be constant at 488.0 torr. [Pg.223]

Despite control, few glass systems allow a match of thermal expansion coefficient to other important cell materials (typically alkaline earth-alumina-silica glasses). In any case, the cell materials don t match each other close enough to allow a rigid seal in larger cells... [Pg.206]

The autoclave (A) is made of bronze. The pressure chamber (7) is filled with water, covered by a brass foil (thickness < 0.1 mm) (8) and rigidly sealed by putting the bayonet socket (9) into position and turning it about 90°. The pump is connected to inlet (P) and additional water is pressed into the autoclave to increase the pressure. The water passes around the cell to reach the pressure chamber. The pressure sealing between autoclave and cell is provided by 0-rings. The hydrostatic pressure is transmitted to the sample volume through the thin plastic membrane (4). [Pg.90]

Fully lined, soft seated, flexible or rigid sealing members... [Pg.845]

A rigid, sealed container inidally contains pure water at 100°C. Some of the water is in the liquid phase, and some is in the vapor phase (i.e., as steam). Air is then injected into the system in an isothermal process at constant volume. What happens ... [Pg.32]


See other pages where Rigid seals is mentioned: [Pg.513]    [Pg.228]    [Pg.34]    [Pg.34]    [Pg.37]    [Pg.293]    [Pg.473]    [Pg.207]    [Pg.23]    [Pg.25]    [Pg.160]    [Pg.160]    [Pg.215]    [Pg.37]    [Pg.10]   
See also in sourсe #XX -- [ Pg.160 ]




SEARCH



Rigid bonded seals

Rigid ceramic seals

Rigid glass-ceramic seals

Sealing rigid bonded seals

© 2024 chempedia.info