Reboilers, thermosyphon location

The column inventory also can be reducdd by the use of low-holdup column internals, including the holdup in the column base. As the design progresses, other features can be included to reduce the inventory. Thermosyphon reboilers have a lower inventory than kettle reboilers. Peripheral equipment such as reboilers can be located inside the column. ... 

Reboilers need to be located next to the tower they serve, except for the pump-through types, which can be located elsewhere. Fired heater reboilers are always located away from the associated tower and use a pump to circulate the bottoms. Ketde-type reboders are preferred from an operational and hydraulic standpoint because they can be designed without the worry of having to ensure sufficient head for circulation required by thermosyphon reboders. However, ketde reboders require a larger-diameter shed that is more cosdy, and the reboder must be supported at a sufficient elevation to get the product to the bottoms pump with adequate NPSH. 

---