Reaction catalysts Stille polycondensation

With values between 13 and 16, the equilibrium constant is still high enough to regard the formation of DEG from EG to be irreversible in an open industrial system. DEG formation is not only an important side reaction during esterification, polycondensation and glycolysis, but also during distillation of EG and water in the process columns. In particular, the residence time in the bottom reboiler of the last separation column is critical, where the polycondensation catalyst and... 

The key to a controlled molecular weight build-up, which leads to the control of product properties such as glass transition temperature and melt viscosity, is the use of a molar excess of diisopropanolamine as a chain stopper. Thus, as a first step in the synthesis process, the cyclic anhydride is dosed slowly to an excess of amine to accommodate the exothermic reaction and prevent unwanted side reactions such as double acylation of diisopropanolamine. HPLC analysis has shown that the reaction mixture after the exothermic reaction is quite complex. Although the main component is the expected acid-diol, unreacted amine and amine salts are still present and small oligomers already formed. In the absence of any catalyst, a further increase of reaction temperature to 140-180°C leads to a rapid polycondensation. The expected amount of water is distilled (under vacuum, if required) from the hot polymer melt in approximately 2-6 h depending on the anhydride used. At the end of the synthesis the concentration of carboxylic acid groups value reaches the desired low level. 

The Suzuki reaction shares many common similarities and features with aforementioned Stille reaction, such as similar catalytic cycles and Pd-based catalysts, and wide tolerance of functionalities. Highlighted below are a few notable factors one needs to consider when choosing Suzuki polymerization to prepare D A polymers. Interested readers are referred to a more general review for details on Suzuki polycondensation." ... 

---