Ramps and Inclines

When moving a load up or down an incline, the load should be facing uphill. When the unit is empty, the forks should be facing downhill at all times. 

Never turn a walkie truck on a ramp or incline the unit could easily tip over. 

If the pallet truck breaks down on a ramp or any other sloped surface, the wheels should be blocked to prevent movement. Place a warning tag on the operating handle to alert others of the mechanical problems. Remove the key to ensure no one uses the truck. 

If using a freight elevator, be sure that the combined weight of the walkie and the load does not exceed capacity. 

While waiting for an elevator, keep your powered equipment parked at least 6 feet away from the elevator. When driving into an elevator, drive in forks-first and center the pallet truck and load in the space available. No one should be in an elevator when the pallet truck is entering or leaving. 

---

Floor or ground conditions including temporary conditions Ramps and inclines with and without load... 

---