Protection against

Prior to moving the rig and all auxiliary equipment the site will have to be cleared of vegetation and levelled. To protect against possible spills of hydrocarbons or chemicals the surface area of a location should be coated with plastic lining and a closed draining system installed. Site management should ensure that any pollutant is trapped and properly disposed of. 

It is easy to notice, that the protection against a short-circuit failure in the X-ray tube circuit implements due to the "soft" outer characteristic of the apparatus main circuit. The overvoltage protection at emergencies in the control system happens due to the redistribution of the magnetie flow, created by power winding I, between the 3,6 control yokes. Therefore the voltage on the X-ray apparatus anode drops approximately two times. 

The magnetic regulators allow to synthesize in one module of the X-ray apparatus main cir-euit commutator, form converter, noncontact smooth ac voltage amplitude regulator, para-metrie stabilizer, ac supply filter, fimetional protection against the short-circuit in the X-ray tube and protection against emergencies in the control circuits. 

Intermetallic compounds with gallium are used as semiconductors. Indium is used to coat other metals to protect against corrosion, especially in engine bearings it is also a constituent of low-metal alloys used in safety sprinklers. The toxicity of thallium compounds has limited the use of the metal, but it does find use as a constituent of high-endurance alloys for bearings. 

C—C double bonds may be protected against electrophiles by epoxidation and subsequent removal of the oxygen atom by treatment with zinc and sodium iodide in acetic acid (J.A. Edwards, 1972 W. Kndll, 1975). Halogenation has often been used for protection, too. The C—C double bond is here also easily regenerated with zinc (see p. 138, D.H.R. Barton, 1976). 

In a recent report (79), a 150—200 mg/cm Parylene C coating provided protection against moisture uptake by three-phase, polyimide, microballoons, and air, syntactic foams. In a previously reported coating of a similar foam, the stated purpose was strengthening (80). 

Dimerization of acrolein is very slow at ambient temperatures but it can become a mnaway reaction at elevated temperature (ca 90°C), a consideration in developing protection against fire exposure of stored acrolein. 

Reactions With Metals. AH metals react to some extent with the halogen fluorides, although several react only superficiaHy to form an adherent fluoride film of low permeabHity that serves as protection against further reaction. This protective capacity is lost at elevated temperatures, however. Hence, each metal has a temperature above which it continues to react. Mild steel reacts rapidly above 250°C. Copper and nickel lose the abHity to resist reaction above 400 and 750°C, respectively. 

Protective Coatings. The primary function of interior can coatings is to prevent interaction between the can and its contents. Exterior can coatings maybe used to provide protection against the environment, or as decoration to give product identity as well as protection. 

---