Positive displacement pump operating point

A Throttling characteristics of centrifugal (c) -and positive- displacement (e, reciprocating d, rotary) pumps. B Control characteristics of positive displacement pumps a,b, Systems characteristics (b, after speed control) VFluid flow Ap, Differential pressure n, Speed h, Stroke length A, B, B, Operating points. 

Power consmnption the operating point of centrifugal pump should be chosen at the highest efficiency possible. Generally, the vendors/manufacturers offer a range of models, which cover the requirements of capacity, head, etc. However, the final selection should be done while keeping in mind the most likely (normal) condition in which the pump will be ran. In case of positive displacement pumps the performance curves should be studied to select proper speed for the capacity and required head... 

Figure 15 Pump curve and operating point of a positive displacement pump.

The pumps can be either centrifugal or positive displacement types. The centrifugal pumps should have a head curve continuously rising toward the shut-off point. The standby pump should be piped into the system in a manner that permits checking of the pump while the main pump is in operation. To achieve this, a restriction orifice is required with a test bleeder valve piped to the return oil line or the reservoir. 

---