Polypropylene bulk polymerisation

Figure 3.54 Flow scheme of polypropylene production using the bulk polymerisation process (with the removal of catalyst residues)...

The use of graphite in nanocomposites has been reported for polypropylene and polystyrene formulations. These are prepared by bulk polymerisation using potassium graphite. Although an increase in thermal stability is observed, there is no increase in mechanical properties. 

Bokobza, L. Burr, A. Garnaud, G. Perrin, M. Pagnotta, S. (2004) Fibre Reinforcement of Elastomers Nanocomposites Based on Sepiolite and Poly(hydroxyethyl acrylate). Polym. Int. Vol.53, N0.8, pp.1060-1065, ISSN 0959-810 Bonduel, D. Mainil, M. Alexandre, M. Monteverde, F. Dubois, P. (2005) Supvported Coordination Polymerisation A Unique Way to Potent Polyolefin Carbon Nanotube Nanocomposites. Chem. Commun. Vol.l4, No.6, pp.781-783 Bruckner, S. Meille, S. Petraccone, V. Pirozzi, B. (1991) Polymorphism in Isotactic Polypropylene. Prog. Polym. Sci. 16, No.2-3, pp.361-404 Bryning, M. Islam, M Kikkawa, J. Yodh, A. (2005) Very Low Conductivity Threshold in Bulk Isotropic Single-Walled Carbon Nanotube-Epoxy Composites. Ado. Mater. Vol.17, N0.9, pp.1186-1191... 

The production and applications of polymers have gradually developed, gaining ground in many fields. The main classes of polymers, namely polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), polystyrene and polyethylene terephthalate are produced in millions of tonnes annually [1]. There are many methods of polymer synthesis free-radical polymerisation (bulk, solution, emulsion and suspension), condensation polymerisation, ethoxylation, polymer compounding and formulations involving solvents, fillers, pigments and so on. Besides the high volume consumption of these common plastics, the demand for polymers with specific end-use properties has increased. 

---