Parallel plate viscometers, rheological measurements

Parallel Plate Viscometer, This instrument resembles the cone and plate viscometer, except that it has a flat horizontal rotating plate in place of the cone. The shear rate within the narrow gap of the two plates is not as uniform as for the cone and plate viscometer. The limiting shear rates for the parallel plate viscometer are similar to those of the cone and plate instrument. This type of a viscometer is suitable for rheological measurements of suspensions and emulsions. 

The parallel-disk viscometer used for measuring the shear stress and normal stress difference of molten thermoplastics is similar in principle to the cone-n-plate viscometer except that the lower cone is replaced by a smooth circular disk. This type of viscometer was initially developed for measuring the rheological properties of rubber [29-33] and therefore made use of serrated disks placed in a pressurized cavity to prevent rubber slippage. When it was adapted for thermoplastic melts [1534,35], measurements were performed using smooth disks and without pressure. 

---