Outlet weir purpose

The clean water flows horizontally through the unn and falls into the clean-water outlet chamber overflowing the adjustable water-outlet weir plates. The height of this water weir as measured from tank inside bottom decides ihc working level of the coalescer unit A sheen baffle is located just before (lie water-outlet weir. The sheen baffle captures small oil droplets that might pass undet the oil-retention baffle. The buildup of oil film at the sheen baffle is so slow that no skimming device is required This oil buildup gets hack into the separation chamber when the unit is shut down for planned maintenance purposes... 

A distillation tray works efficiently, when the vapor and liquid come into intimate contact on the tray deck. To this end, the liquid should flow evenly across the tray deck. The vapor should bubble up evenly through the perforations on the tray deck. The purpose of the outlet weir is to accomplish both these objectives, as follows ... 

The segmental, or chord downcomer, shown in Figure 11.26a is the simplest and cheapest form of construction and is satisfactory for most purposes. The downcomer channel is formed by a flat plate, called an apron, which extends down from the outlet weir. The apron is usually vertical but may be sloped (see Figure 11.26b) to increase the plate area available for perforation. If a more positive seal is required at the downcomer at the outlet, an inlet weir can be fitted (see Figure 11.26c) or a recessed seal pan used (see Figure 11.26d). Circular downcomers (pipes) are sometimes used for small liquid flow rates. 

---