Organic compounds aromatic hydrocarbons

Recent studies, including the use of Microtox and ToxAlert test kits [55,56], were carried out for the determination of the toxicity of some non-ionic surfactants and other compounds (aromatic hydrocarbons, endocrine disruptors) before implementation on raw and treated wastewater, followed by the identification and quantification of polar organic cytotoxic substances for samples with more than 20% inhibition. Furthermore, the study of their contribution to the total toxicity was obtained using sequential solid-phase extraction (SSPE) before liquid chromatography-mass spectrometry (LC-MS) detection. This combined procedure allows one to focus only on samples containing toxic substances. 

Alkanes, alkenes, alkynes, and aromatic compounds are members of a family of organic compounds called hydrocarbons, compounds of carbon and hydrogen. These hydrocarbons are the simplest of organic compounds, but are extremely important to our society as fuels and raw materials for chemical industries. We... 

Fig. 4.14 gives a plot of data on the partition coefficient of non-polar organic compounds (aromatic chloro hydrocarbons) to various solid phases (having different contents of organic material. Kow is inversely related to water solubility,Sw-... 

SECTION 24.2 The simplest types of organic compounds are hydrocarbons, those composed of only carbon and hydrogen. There are four major kinds of hydrocarbons alkanes, alkenes, alkynes, and aromatic hydrocarbons. Alkanes are composed of only C—H and C—C single bonds. Alkenes contain one or more carbon-carbon double bonds. Alkynes contain one or more carbon carbon triple bonds. Aromatic hydrocarbons contain cychc arrangements of carbon atoms bonded through both saturated hydrocarbons the others are unsaturated. 

Organic compounds are hydrocarbons or derivatives of hydrocarbons. Hydrocarbons contain only H and C atoms. The three main groups of hydrocarbons are saturated hydrocarbons, hydrocarbons with only single bonds between the carbon atoms unsaturated hydrocarbons, hydrocarbons that contain double or triple bonds between carbon atoms and aromatic hydrocarbons, hydrocarbons that contain a benzene ring (a six-membered ring of carbon atoms with alternating single and double carbon-carbon bonds described by resonance formulas). 

Cobalt(II) invariably exists as an octahedrally coordinated ion, and has d electrons which can become involved both in electron transfer reaction and ligand bonding [164]. The powerful oxidizing capacity of trivalent cobalt has been shown by several investigators [165-183]. A wide variety of organic compounds—aromatic as well as aliphatic aldehydes, olefins, ketones, hydrocarbons, and alcolufis—have been found to be susceptible to oxidation by cobaltic ions, and the kinetics of these reactions have been reported in detail. That Co could initiate the vinyl polymerization was suggested by Baxendale et al. [184]. Later, Santappa and co-workers [185-187] investi-... 

Outside of carbon monoxide for which the toxicity is already well-known, five types of organic chemical compounds capable of being emitted by vehicles will be the focus of our particular attention these are benzene, 1-3 butadiene, formaldehyde, acetaldehyde and polynuclear aromatic hydrocarbons, PNA, taken as a whole. Among the latter, two, like benzo [a] pyrene, are viewed as carcinogens. Benzene is considered here not as a motor fuel component emitted by evaporation, but because of its presence in exhaust gas (see Figure 5.25). 

More precisely, the rate of ozone formation depends closely on the chemical nature of the hydrocarbons present in the atmosphere. A reactivity scale has been proposed by Lowi and Carter (1990) and is largely utilized today in ozone prediction models. Thus the values indicated in Table 5.26 express the potential ozone formation as O3 formed per gram of organic material initially present. The most reactive compounds are light olefins, cycloparaffins, substituted aromatic hydrocarbons notably the xylenes, formaldehyde and acetaldehyde. Inversely, normal or substituted paraffins. 

There are a total of eighteen different hydrocarbon series, of which the most common constituents of crude oil have been presented - the alkanes, cycloalkanes, and the arenes. The more recent classifications of hydrocarbons are based on a division of the hydrocarbons in three main groups alkanes, naphthanes and aromatics, along with the organic compounds containing the non-hydrocarbon atoms of sulphur, nitrogen and oxygen. 

Metallic sodium. This metal is employed for the drying of ethers and of saturated and aromatic hydrocarbons. The bulk of the water should first be removed from the liquid or solution by a preliminary drying with anhydrous calcium chloride or magnesium sulphate. Sodium is most effective in the form of fine wire, which is forced directly into the liquid by means of a sodium press (see under Ether, Section II,47,i) a large surface is thus presented to the liquid. It cannot be used for any compound with which it reacts or which is affected by alkalis or is easily subject to reduction (due to the hydrogen evolved during the dehydration), viz., alcohols, acids, esters, organic halides, ketones, aldehydes, and some amines. 

Picrates, Many aromatic hydrocarbons (and other classes of organic compounds) form molecular compounds with picric acid, for example, naphthalene picrate CioHg.CgH2(N02)30H. Some picrates, e.g., anthracene picrate, are so unstable as to be decomposed by many, particularly hydroxylic, solvents they therefore cannot be easily recrystaUised. Their preparation may be accomplished in such non-hydroxylic solvents as chloroform, benzene or ether. The picrates of hydrocarbons can be readily separated into their constituents by warming with dilute ammonia solution and filtering (if the hydrocarbon is a solid) through a moist filter paper. The filtrate contains the picric acid as the ammonium salt, and the hydrocarbon is left on the filter paper. 

This reagent affords compounds (1 1) with aromatic hydrocarbons and other classes of organic compounds (heterocyclic compounds, aromatic ethers, etc.). 

The most common interfering substance, especially with alcohols of low mole cular weight, is water this may result in an inaccurate interpretation of the test if applied alone. Most of the water may usually be removed by shaking with a little anhydrous calcium sulphate,. though dry ethers (and also the saturated aliphatic and the simple aromatic hydrocarbons) do not react with sodium, many other classes of organic compounds do. Thus ... 

The principal nonpolar-type adsorbent is activated carbon. Kquilihrium data have been reported on hydrocarbon systems, various organic compounds in water, and mixtures of organic compounds (11,15,16,46,47). With some exceptions, the least polar component of a mixture is selectively adsorbed eg, paraffins are adsorbed selectively relative to olefins of the same carbon number, but dicycUc aromatics are adsorbed selectively relative to monocyclic aromatics of the same carbon number (see Carbon, activated carbon). 

Polycychc aromatic hydrocarbons (PAHs) are carcinogens produced by the thermal breakdown of organic materials. These are widely distributed in both food and the environment, and are some of the principal carcinogens in cigarette tar and air pollution. Of over 20 PAHs isolated, benzopyrene and quinoline compounds are the most commonly encountered in foods, particularly those which are broiled or fried (111). Shellfish living in petroleum contaminated waters may also contain PAHs (112). 

Experimental procedures have been described in which the desired reactions have been carried out either by whole microbial cells or by enzymes (1—3). These involve carbohydrates (qv) (4,5) steroids (qv), sterols, and bile acids (6—11) nonsteroid cycHc compounds (12) ahcycHc and alkane hydroxylations (13—16) alkaloids (7,17,18) various pharmaceuticals (qv) (19—21), including antibiotics (19—24) and miscellaneous natural products (25—27). Reviews of the microbial oxidation of aUphatic and aromatic hydrocarbons (qv) (28), monoterpenes (29,30), pesticides (qv) (31,32), lignin (qv) (33,34), flavors and fragrances (35), and other organic molecules (8,12,36,37) have been pubflshed (see Enzyp applications, industrial Enzyt s in organic synthesis Elavors AND spices). 

Most organic compounds, including aromatic hydrocarbons, alcohols, esters, ketones, ethers, and carboxyUc acids are miscible with nitroparaffins, whereas alkanes and cycloalkanes have limited solubiUty. The lower nitroparaffins are excellent solvents for coating materials, waxes, resins, gums, and dyes. 

In general, peroxomonosulfates have fewer uses in organic chemistry than peroxodisulfates. However, the triple salt is used for oxidizing ketones (qv) to dioxiranes (7) (71,72), which in turn are useful oxidants in organic chemistry. Acetone in water is oxidized by triple salt to dimethyldioxirane, which in turn oxidizes alkenes to epoxides, polycycHc aromatic hydrocarbons to oxides and diones, amines to nitro compounds, sulfides to sulfoxides, phosphines to phosphine oxides, and alkanes to alcohols or carbonyl compounds. 

Reaction with Organic Compounds. Aluminum is not attacked by saturated or unsaturated, aUphatic or aromatic hydrocarbons. Halogenated derivatives of hydrocarbons do not generally react with aluminum except in the presence of water, which leads to the forma tion of halogen acids. The chemical stabiUty of aluminum in the presence of alcohols is very good and stabiUty is excellent in the presence of aldehydes, ketones, and quinones. 

---