Orbitrap analyzer schematic

Figure 2.18. Schematic of an orbitrap analyzer. The z-direction oscillary motion of the ions induces an image current that is detected by the electrodes.

FIGURE 2.37 Schematic of a hybrid linear ion trap with an orbitrap or ICR cell as the second analyzer. 

Figure 3.13 Schematic representation of an orbitrap mass analyzer. The central electrode is biased at a high voltage and the two outer electrodes are at ground potential. Ions enter this region at one side of the outer electrode and encircle the central electrode. The periodic motion of ions along the central electrode (indicated by the double-headed arrow) is recorded to obtain the time-domain signal...

Figure 3.17 Schematic representation of the orbitrap mass spectrometer. It consists of a QMF and a dual LIT. The C trap pushes ions into the orbitrap mass analyzer which is installed in the ultrahigh vacuum region...

Fig. 9.27. Schematic of the Thermo Scientific LTQ Orbitrap Velos hybrid FT mass spectrometer combining dual-LIT and HCD with an Orbitrap mass analyzer. Courtesy of Thermo Fisher Scientific, Bremen.

---