Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Gloves neoprene

Fluorine, the most reactive element known, is a dangerous material but may be handled safely using proper precautions. In any situation where an operator may come into contact with low pressure fluorine, safety glasses, a neoprene coat, boots, and clean neoprene gloves should be worn to afford overall body protection. This protection is effective against both fluorine and the hydrofluoric acid which may form from reaction of moisture in the air. [Pg.131]

Ethylene dibromide is a suspected human carcinogen and worker exposure by all routes should be carefiiUy controUed to levels as low as reasonably achievable (67). Ethylene dibromide causes severe blistering of the skin if contact is prolonged. Eye contact with the Hquid will cause pain, irritation, and temporary impairment of vision. Recommended safety equipment includes safety goggles, a NIOSH approved canister-type gas mask for organic vapors, neoprene gloves, and neoprene overshoes. In case of contact with ethylene dibromide, contaminated clothing and shoes should be removed and eyes or skin washed with plenty of water for at least 15 minutes. Contaminated clothes should be washed before reuse and contaminated shoes should be discarded. [Pg.295]

Health Hazards Information - Recommended Personal Protective Equipment Individual breathing devices with air supply neoprene gloves protective clothing eye protection Symptoms Following Exposure Inhalation of concentrated gas will cause suffocation. Contact will liquid can damage eyes because of low temperature. Frostbite may result from contact with liquid General Treatment for Exposure INHALATION remove to fresh air use artificial respiration if necessary. EYES get medical attention promptly if liquid has entered eyes. SKIN soak in lukewarm water (for frostbite) Toxicity by Inhalation (Threshold Limit Value) Data not available Short-Term Exposure Limits Data not available Toxicity by Ingestion Not pertinent (boils at -24.7°C) Late Toxicity Data not available Vtqtor (Gas) Irritant Characteristics Data not available Liquid or Solid Irritant Characteristics Data not available Odor Threshold Data not available. [Pg.130]

Caution. Thallium compounds are extremely toxic. Avoid inhalation and contact with skin. Carry out this procedure in a well-ventilated hood and use neoprene gloves. Residues containing thallium compounds must carefully be disposed in accordance with its toxic nature. [Pg.173]

The operation should be done in a hood, and the hands should be protected with Neoprene gloves. [Pg.47]

Mickelsen, R.L. and Hall, R.C., A breakthrough time comparison of nitrile and neoprene glove materials produced by different glove manufacturers, Am. Ind. Hyg. Assoc. J., 48, 941, 1987. [Pg.597]

Ethacure 300 is a much easier material to handle, as it is a liquid at room temperature. It is classed as a hazardous substance according to the safety authorities criteria. As with all chemicals, it must be treated with respect and used in accordance with the MSDS, which suggests that there should be sufficient ventilation. Neoprene gloves must be worn with disposable or impervious clothing. [Pg.201]

Wear neoprene gloves,17 laboratory coat, and eye protection. Cover spill with a 1 1 1 mixture by weight of sodium carbonate or calcium carbonate, clay cat litter (bentonite), and sand. Scoop into a beaker or pail. In the fume hood, slowly add the acid mixture to a pail of cold water. When reaction ceases, neutralize with more sodium carbonate if necessary. When solids have settled, decant liquid into drain with 50 times its volume of water. Discard solid residue with normal refuse. Ventilate site of spillage well to evaporate remaining liquid and dispel vapor.18,19... [Pg.2]

Small Quantities. Wear neoprene gloves, laboratory coat and eye protection. Work in the fume hood. Add slowly to large volume of cold water in a plastic pail. Neutralize with 5% sodium hydroxide solution or sodium carbonate and pour into the drain.18... [Pg.2]

Leaking Cylinder. Wear neoprene gloves and self-contained respirator. Transfer the cylinder to a fume hood. Attach a long piece of flexible tubing to the cylinder valve outlet. Adjust the valve to give a moderate flow of diborane. Introduce the gas to the bottom of a tall vessel containing water. Diborane is hydrolyzed by water to hydrogen and boric acid.12... [Pg.204]

Caution Intensely poisonous causes very painful burns. Extremely corrosive. Use proper ventilation and neoprene gloves when working with the concentrated acid. The fumes from concentrated nitric acid are harmful. [Pg.172]

Shoulder length and standard neoprene gloves, and neoprene apron. [Pg.49]

For HF steps protective neoprene gloves, apron, and a plastic face shield should be worn. For the low HF step, add up to 4 g of resin to one of the Kel-F reaction vessels that are a part of the HF apparatus, and add 37.5 mL of a mixture of 90% dimethylsulfide, 5% p-thiocresol, 5% p-cresol and chill with liquid nitrogen and draw over 12.5 mL of anhydrous HF using vacuum created with a water driven aspirator to make a 25% HF solution. Remove liquid nitrogen. [Pg.51]

Appropriate personal protective equipment (PPE safety glasses, preferably a face shield, PVC or Neoprene gloves, chemical-proof apron) must be worn during work. [Pg.154]

Table 6.3 Breakthrough times (minutes) for perchloroethylene, p-Xylene, n-Butyl acetate. Ethanol, and n-Hexane through nitrile and neoprene gloves from several manufecturers (U.S. EPA, Guidance Manual for Selecting Pro-... Table 6.3 Breakthrough times (minutes) for perchloroethylene, p-Xylene, n-Butyl acetate. Ethanol, and n-Hexane through nitrile and neoprene gloves from several manufecturers (U.S. EPA, Guidance Manual for Selecting Pro-...
We can find information about the safety of ethylene glycol and other chemicals from the World Wide Web (WWW) (Table 4-4). One source is the Vermont Safely information on the Internet (Vermont SIRI), For example, we can learn fixim the Control Measures that we should use neoprene gloves when handling the material, and that we should avoid breathing the vapors. If we... [Pg.90]

Do not eat, drink, or smoke while cleaning up. Use a self-contained respirator, a mask with filter (type A class 3) or a filtering mask (e.g., EN 405). Wear protective clothing, safety glasses, and impervious gloves (e.g., neoprene gloves). Ensure adequate ventilation. Avoid all sources of ignition, hot surfaces, and open flames (see also Section 7). [Pg.512]

Skin protection If prolonged or repeated skin contact is likely, neoprene gloves should be worn. Good personal hygiene practices should always be followed. [Pg.513]


See other pages where Gloves neoprene is mentioned: [Pg.552]    [Pg.484]    [Pg.489]    [Pg.84]    [Pg.167]    [Pg.207]    [Pg.266]    [Pg.267]    [Pg.25]    [Pg.75]    [Pg.241]    [Pg.25]    [Pg.200]    [Pg.203]    [Pg.204]    [Pg.126]    [Pg.155]    [Pg.186]    [Pg.197]    [Pg.318]    [Pg.342]    [Pg.479]    [Pg.623]    [Pg.159]    [Pg.294]    [Pg.422]    [Pg.211]    [Pg.25]    [Pg.223]    [Pg.144]   
See also in sourсe #XX -- [ Pg.220 ]




SEARCH



Gloves

Neoprene

© 2024 chempedia.info