Molecular weight inorganic compounds

Reverse Osmosis Hater is forced through a membrane by application of pressure thereby enriching the water sample in constituents which ordinarily cannot pass through the membrane. Molecular weight > 200 Compounds of small size are not concentrated. Inorganic materials may contaminate sample. Membranes may either adsorb constituents or release impurities into the sample. 

RIA techniques generate great amounts of radioactive liquid wastes whose composition depends on the specific assays that are carried out in each laboratory. Liquid wastes from RIA techniques are usually composed of different types of proteins (some of them radioactively labelled), preservative solutions, several low-molecular-weight organic compounds, and inorganic salts— all in aqueous solutions. These wastes are classified as low and medium radioactive, but they are also potentially infectious since they can contain pathogens from patient s blood [4]. Sometimes, the infectious risks of these wastes can be much more dangerous than the risks associated with radioactivity. 

Solid materials vaporize when heated to sufficiently high temperatures this process may proceed through the liquid phase. A thin film is obtained by the condensation of the vapor onto a colder substrate [4]. This thermal evaporation method is applied to deposit films of inorganic materials, such as metals and their alloys. However, the technique is being used increasingly for the formation of layers of low molecular weight organic compounds. 

The composition analysis of propellant normally is proceeded by extraction, where low molecular weight organic compounds are separated from the cellulose nitrate and inorganic componenets. The extraction agent usually employed is diethyl ether or methylene chloride. 

The final product from many industrial chemical processes is a solid material. This is especially true for inorganic compounds, but is also common for a number of moderate- to high-molecular-weight organic compounds. Such processes involve the separation operations of leaching, evaporation, solution crystallization (solutes with high melting points... 

Polycondensations are defined as polymerizations in which each individual bonding step must be separately activated (see also Chapter 15). In catalyzed polycondensations, the catalyst moves from chain to chain. In principle, then, all known reactions of low-molecular-weight inorganic and organic chemistry, which are mostly carried out with monofunctional compounds, become polycondensation reactions when the functionality of the compounds is increased. Experimentally, however, it has been shown that very few of the types of reaction that proceed in low-molar-mass chemistry can be adopted as polycondensation reactions leading to macromolecules. 

---