Laminar flow of concentrated suspensions and apparent

9 Laminar flow of concentrated suspensions and apparent slip at the pipe wall 

The flow properties of suspensions are complex. The apparent viscosity at a given shear rate increases with increasing solids concentration and rises extremely rapidly when the volume fraction of solids reaches about 50 per cent. The flow properties also depend on the particle size distribution and the particle shape, as well as the flow properties of the suspending liquid. 

With some concentrated suspensions of solid particles, particularly those in which the liquid has a relatively low viscosity, the suspension appears to slip at the pipe wall or at the solid surfaces of a viscometer. Slip occurs because the suspension is depleted of particles in the vicinity of the solid surface. In the case of concentrated suspensions, the main reason is probably that of physical exclusion if the suspension at the solid surface were to have the same spatial distribution of particles as that in the bulk, some particles would have to overlap the wall. As a result of the lower concentration of particles in the immediate vicinity of the wall, the effective viscosity of the suspension near the wall may be significantly lower than that of the bulk and consequently this wall layer may have an extremely high shear rate. If this happens, the bulk material appears to slip on this lubricating layer of low viscosity material. 

Although this type of flow can be treated by a multiple layer model, the 

The occurrence of slip invalidates all normal analyses because they assume that the velocity is zero at the wall. Returning to the Rabinowitsch-Mooney analysis, the total volumetric flow rate for laminar flow in a pipe is given by 

---