Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Laboratory mixing molder

Jin et al. (26) used melt blending to fabricate MWCNT-PMMA composites with different CNT loadings varying from 0 to 26 wt%. They used a laboratory mixing molder to disperse MWCNT in PMMA at 200°C followed by compression molding at 210°C. Their TEM studies revealed good dispersion even at high MWCNT concentration. The composites showed enhanced mechanical and thermal properties. [Pg.184]

An early study on the melt mixing of MWNTs and polymer was pursued by Jin and co-workers in 2001. PMMA was mixed with 26 wt.% MWNTs in a laboratory mixing molder at 200 ° C. Then, the melt was compression -molded trader 8-9 MPa... [Pg.465]

See other pages where Laboratory mixing molder is mentioned: [Pg.183]    [Pg.7]    [Pg.183]    [Pg.7]    [Pg.355]    [Pg.293]    [Pg.111]   
See also in sourсe #XX -- [ Pg.183 ]



SEARCH



© 2024 chempedia.info