Isooctane fuel

Table I. Results from fuel nitrogen conversion experiments - isooctane fuel.

Figure 5. TFN Emissions vs. Equivalence Ratio for Prevaporized Isooctane Fuel at Two Residence Times...

Figure 6. TFN Emissions and HC Concentration vs. Equivalence Ratio for Liquid Spray and Prevaporized Isooctane Fuel...

Laboratory (Ahmed, Kumar, Krumpelt, 1997 Ahmed, 1998) is used in the catalytic reactor. Inlet gas is a 1 1 atmospheric-pressure O2-N2 mixture (O2 and N2 flow rates are 22 standard cm / min). Two liquids are supplied to the system isooctane fuel with flow rate... 

Moon, DJ, Ryu, JW, Yoo, KS, Sung, DJ, Lee, SD. Development of isooctane fuel processor system for fuel cell applications. Catal. Today 2008 138 222-227. 

Measurements were made of the permeation rates of methanol, toluene, a 50/50 toluene/isooctane fuel (fuel C) and fuel C with 10% ethanol or 15% methanol through EVOH films. Large scale methanol and water induced plasticisation was suggested by large solvent uptakes and confirmed by the observation of considerable decreases in Tg. The permeability of fuel C increased significantly when methanol was present, while the high barrier properties of EVOH to hydrocarbons was maintained for fuel C containing ethanol. 9 refs. 

---