Intermediate temperature solid disadvantage

Cellulose reacts with isocyanates in anhydrous pyridine or with urea and substituted ureas at relatively high temperature to yield carbamates. The optimum carbamation reaction of microcrystalline cellulose with urea in a dry solid mixture has been studied [51]. In addition, a preferentially C6-modified cellulose carbamate derivative has been obtained [52]. Heating of cellulose with thiourea at 180°C yielded cellulose thiocarbamate [53]. Heat treatment of cellulose isocyanate products has been utilized for the production of urethanes [54]. When ceUuIose was treated with phenylisocyanate at 100 C in DMF in the presence of dibutyltin dilaurate and triethylenediamine, celiuiose bisphenylcarbamate was formed [55]. Treatment of cellulose with urea at temperatures at or above the latter s melting point (where urea decomposes into isocyanic acid and ammonia) has been employed for the production of cellulose carbamates fibers [56]. The advantages and disadvantages of using urea as an intermediate for production of fiber have been discussed [57]. 

Hydrothermal-growth is usually defined as the use of an aqueous solvent at elevated temperature and pressure to dissolve a solute which would be insoluble under ordinary conditions. The advantages of the hydrothermal technique are a low growth temperature, a AT close to 0 at liquid/solid interface, an easily scalable technique, the reduction of most of the impurities from source. The disadvantages are the presence of intermediate products, the lithium or sodium or potassium incorporation when such solvents as LiOH, NaOH or KOH are used, the slow growth rates ( 10 mils per day), the inert liner needed, the occasional incorporation of OH and H2O. 

---