Impact screw dislocation

Flinn et al. [30] describes an experimental impact technique in which <100)-oriented LiF single crystals ( 8 ppm Mg) are loaded in a controlled manner and the multiplication of screw dislocations is measured. The peak shear stress in this relatively soft material is 0.01 GPa. For shear impulses exceeding approximately 40 dyne s/cm, dislocation multiplication is adequately described by the multiple-cross-glide mechanism [(7.24)] with m = l/bL = (2-4) X 10 m, in reasonable agreement with quasi-static measurement [2]. 

---