Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Heat test at

Heat Tests. International heat test at 75° resulted in a 0.05% wt loss. It is not appreciably affected by storage after one year at 50° (Refs 14, 19 20). Vacuum stability test at 120° -... [Pg.285]

Expln temp is above 360°. Impact sensy is 50cm using a BM machine. Hygry test at 90% RH showed gain of 0.88%, and at 100% RH a gain of 1.61% was demonstrated. The International Heat Test at 75° showed a 1.1% loss of wt. Stability testing at 135° for 300 mins showed no acidity or expln. Vacuum stability a 5g sample yielded 12cc of gas in 48 hrs (Ref 3)... [Pg.326]

Methyl Violet Heat Test at 120°. 285 min (propyl ether trinitrate 120 min (NG 65 min). [Pg.599]

International Heat Test at 75°. A zero wt loss was noted (Ref 2)... [Pg.603]

Abel Heat Test at 82.2° — 3 mins (NG 10 mins) Friction Sensitivity — very insensitive Impact Sensitivity — very insensitive Initiation by Detonators — incomplete with No 8 Briska Detonator in Trauzl Test Power by Ballistic Mortar — 62% Blasting Gelatin, which.corresponds to about 110% TNT Power by Trauzl Test — 106% TNT Thermal Stability at 120°— no brown fumes after 5 hours... [Pg.51]

Abel Heat Test at 82.2° — 30 seconds, vs 10 mins for NG Hygroscopicity - none... [Pg.52]

Heat Test at 100°(Fr) - litmus paper turns red after ca 48 hours of exposure, vs 3 30 hrs for Ethylenediamine Dinitrate (Ref 13)... [Pg.113]

See pp 1333 under "Stability Test Heat Test with Potassium Iodide-Starch Test Stability by Heat Test at 120° or 134.5°C With Standard Methyl Violet Paper (1295—96) Stability by Surveillance Test at 65-5°C(1296) Stability by the Taliani Test for Propellants (1296-97)... [Pg.350]

CDj) T. Urbanski, Vol 2(1965), pp 22-31 gives methods for determining the Stability of Nitric Esters, which include Abel Heat Test, Litmus Test (Vieille Test), Heat Test at 134.5°C, Silvered Vessel Test, Loss of Weight Test, Will Test, Bergmann Junk Test and Manometric Test... [Pg.352]

Thermal Stability, See Heat Test at 100°, International Test (75°) and Vacuum Stability Test at 100°... [Pg.604]

Explosion Temperature. 133°(vs 225° for PETN) Heat Test at 75°. exploded in 30 minutes Impact Sensitivity. 2kg wt, PicArsnApp, 2 inches (PETN 6 inches)... [Pg.760]

Abel heat test at 120°C 10 min without visible change... [Pg.105]

The reduced heating test at a temperature of 110°C in the presence of a blue litmus paper, which should not redden in less than 10 hr. [Pg.558]

International Heat Test at 75°, 0.4% loss in 48hrs reported by British no loss reported in tests conducted at Picatinny Arsenal Power by Trauzl Pb Block, 146 vs 100 for Picric Acid... [Pg.135]

See other pages where Heat test at is mentioned: [Pg.32]    [Pg.33]    [Pg.69]    [Pg.69]    [Pg.72]    [Pg.123]    [Pg.135]    [Pg.135]    [Pg.202]    [Pg.322]    [Pg.601]    [Pg.603]    [Pg.780]    [Pg.833]    [Pg.312]    [Pg.317]    [Pg.573]    [Pg.1]    [Pg.24]    [Pg.74]    [Pg.113]    [Pg.113]    [Pg.113]    [Pg.113]    [Pg.113]    [Pg.118]    [Pg.311]    [Pg.603]    [Pg.738]    [Pg.749]    [Pg.759]    [Pg.797]    [Pg.812]    [Pg.84]    [Pg.31]    [Pg.134]    [Pg.267]   


SEARCH



Heat test

© 2024 chempedia.info