Hazard classes, chemical

Chemical storage should be by hazard class. Chemicals should not be stored merely by alphabetical order. 

The hazard class (chemicals associated with the health hazard pictogram) are shown in Table II. Collectively these chemicals are known as CMRs — Carcinogens, Mutagens, or toxic to Reproduction. 

Software manages and tracks MSDS database information by chemical ID, supplier, synonyms, components, registry numbers, completion status, uses, and hazard classes. Subscription updating. Requires 640K memory and hard disk. 

Fire Hazards - Flash Point (deg. F) (a) <0 CC (b) 0 - 73 CC (3) 73 -141 CC Flammable Limits in Air (%) Data not available Fire Extinguishing Agents Foam, carbon dioxide, dry chemical Fire Extinguishing Agents Not to be Used Water may be ineffective Special Hazards of Combustion Products Not pertinent Behavior in Fire Not pertinent Ignition Temperature Data not available Electrical Hazard Class I, Group D Burning Rate Approx. 4 mm/min. 

Vapor is heavier than air and may travel considerable distance to source of ignition and flash back Ignition Temperature (deg. F) 824 Electrical Hazard Class I, Group D Burning Rate 4 mm/min. Chemical Reactivity - Reactivity with Water No reaction Reactivity with Common Materials No reactions Stability During Transport Stable Neutralizing Agerusfor Acids andCaustics Not pertinent Polymerization Not pertinent Inhibitor of Polymerization Not pertinent. 

---