Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Green comparison

Ehcker, T.M. and S.A. Green Comparison of gas-phase free-radical populations in tobacco smoke and model systems by HPLC Environ. Health Perspect. 109 (2001) 765-771. [Pg.1479]

Meier, S. D. Kovalchuk, Y. Rose, C. R. Properties of the new fluorescent Na indicator CoroNa Green comparison with SBFI and confocal Na" " imaging. J. Neurosci. Methods 2006, 155, 251-259. [Pg.110]

Due to its importance the impulse-pulse response function could be named. .contrast function". A similar function called Green s function is well known from the linear boundary value problems. The signal theory, applied for LLI-systems, gives a strong possibility for the comparison of different magnet field sensor systems and for solutions of inverse 2D- and 3D-eddy-current problems. [Pg.372]

Properties. The composition of shale oil has depended on the shale from which it was obtained as well as on the retorting method by which it was produced. Properties of shale oils from various locations are given in Table 8. A comparison of a Green River shale oil and a Michigan Antrim shale oil, retorted under similar conditions, is given in Table 9. [Pg.352]

Table 10. Comparison of Green River Crude Shale Oil and Median U.S. Crude ... Table 10. Comparison of Green River Crude Shale Oil and Median U.S. Crude ...
Fi re 9.9 Comparison of the hellx-tum-helix motifs in homeodomains (a) and X repressor (b). The recognition helix (red) of the homeodomain is longer than in the procaryotic repressor motif. In addition the first helix of the homeodomain [(green in (a)] is oriented differently. [Pg.161]

Revie, R. W. and Greene, N. D. Comparison of the In Vivo and In Vitro Corrosion of 18-8 Stainless Steel and Titanium , Journal of Biomedical Materials Research, 3, 465-470 (1969)... [Pg.466]

Procedure. Dissolve a weighed portion of the substance in which the amount of iron is to be determined in a suitable acid, and evaporate nearly to dryness to expel excess of acid. Dilute slightly with water, oxidise the iron to the iron(III) state with dilute potassium permanganate solution or with a little bromine water, and make up the liquid to 500 mL or other suitable volume. Take 40 mL of this solution and place in a 50 mL graduated flask, add 5 mL of the thiocyanate solution and 3 mL of AM nitric acid. Add de-ionised water to dilute to the mark. Prepare a blank using the same quantities of reagents. Measure the absorbance of the sample solution in a spectrophotometer at 480 nm (blue-green filter). Determine the concentration of this solution by comparison with values on a reference curve obtained in the same way from different concentrations of the standard iron solution. [Pg.691]

In conclusion, we observe that many writers in the modern literature seem to agree about the convenience of the definition (Eq. 11.67), but that there has also been a great deal of confusion. For comparison we would like to refer to Slater, and Arai (1957). Almost the only exception seems to be Green et al. (1953, 1954), where the exact wave function is expanded as a superposition of orthogonal contributions with the HF determinant as its first term ... [Pg.235]

Reactions of UCI4 with [Li RC(NCy)2 (THF)]2 (R = Me, Bu ) in THF gave the tris(amidinate) compounds [RC(NCy)2]3UCl that could be reduced with lithium powder in THF to the dark-green homoleptic uranium(lll) complexes [RC(NCy)2]3U. Comparison of the crystal structure of [MeC(NCy)2]3U with those of the lanthanide analog showed that the average U-N distance is shorter than expected from a purely ionic bonding model. ... [Pg.241]

In comparison with the more standard Configuration Interaction (Cl) method, the one-particle Green s function approach offers the essential advantages, in the outlook of numerical applications on extended systems, of a stronger and systematic compactness (30) of the configuration spaces in high order approximations and of energy separability (5,31) in the dissociation limit (size-consistency). The latter is a necessary prerequisite ( ) for a correct (i.e. size-... [Pg.80]

Clark GJ, Goodin RR, Smiley JW. 1985. Comparison of ultraviolet and reductive amperometric detection for determination of ethyl and methyl parathion in green vegetables and surface water using high-performance liquid chromatography. Anal Chem 57 2223-2228. [Pg.199]

Fig. 3. Sequence comparison of the FA/FB-binding subunits of PSl from tobacco and the RC of green sulfur bacteria with that of the 2[4Fe-4S] ferredoxin from Peptococcus aerogenes. Cysteine ligands to the right-hand cluster in the three structures of Fig. 2 (i.e., cluster Fb for the case of the FA/FB-protein) are marked by open boxes Emd residues ligating the left-hand cluster by hatched boxes. Fig. 3. Sequence comparison of the FA/FB-binding subunits of PSl from tobacco and the RC of green sulfur bacteria with that of the 2[4Fe-4S] ferredoxin from Peptococcus aerogenes. Cysteine ligands to the right-hand cluster in the three structures of Fig. 2 (i.e., cluster Fb for the case of the FA/FB-protein) are marked by open boxes Emd residues ligating the left-hand cluster by hatched boxes.
Fig. 6. Sequence comparisons of Rieske proteins from spinach chloroplasts, beef heart mitochondria, green sulfur bacteria, and firmicutes. The extended insertion of proteobacterial Rieske proteins as compared to the mitochondrial one is indicated by a dotted arrow. The redox-potential-influencing Ser residue is marked by a vertical arrow. The top and the bottom sequence numberings refer to the spinach and bovine proteins, respectively. Fully conserved residues are marked by dark shading, whereas the residues conserved in the b6f-group are denoted by lighter shading. Fig. 6. Sequence comparisons of Rieske proteins from spinach chloroplasts, beef heart mitochondria, green sulfur bacteria, and firmicutes. The extended insertion of proteobacterial Rieske proteins as compared to the mitochondrial one is indicated by a dotted arrow. The redox-potential-influencing Ser residue is marked by a vertical arrow. The top and the bottom sequence numberings refer to the spinach and bovine proteins, respectively. Fully conserved residues are marked by dark shading, whereas the residues conserved in the b6f-group are denoted by lighter shading.
Fig. 4—Comparison of relative error for different schemes, (a) A comparison of relative errors for a uniform pressure on a rectangle area 2a X 2b, in which the multi-summation is calculated via DS, FFT, and MLMI, and 1C is determined through bilinear interpolation based scheme, (b) A comparison of relative errors for a uniform pressure on a rectangle area 2ax2fa, in which the multisummation is calculated via DS and 1C is determined through the Green, constant, and bilinear-based schemes, (c) A comparison of relative errors for a Hertzian pressure on a circular region in radius a, in which the multi-summation is calculated via DS, and 1C is determined through the Green, constant, and bilinear-based schemes. Fig. 4—Comparison of relative error for different schemes, (a) A comparison of relative errors for a uniform pressure on a rectangle area 2a X 2b, in which the multi-summation is calculated via DS, FFT, and MLMI, and 1C is determined through bilinear interpolation based scheme, (b) A comparison of relative errors for a uniform pressure on a rectangle area 2ax2fa, in which the multisummation is calculated via DS and 1C is determined through the Green, constant, and bilinear-based schemes, (c) A comparison of relative errors for a Hertzian pressure on a circular region in radius a, in which the multi-summation is calculated via DS, and 1C is determined through the Green, constant, and bilinear-based schemes.
Miyachi S, Lessof MH, Kemeny DM, Green LA Comparison of the atopic background between allergic and non-allergic beekeepers. Int Arch Allergy Appl Immunol 1979 58 160-166. [Pg.155]

Green JA. The EDC value proposition to the pharmaceutical industry. A detailed comparison of EDC versus paper model costs for four different clinical research projects (Phase I-IIIb). Datatrak International, Inc., 2001. [Pg.629]

Polylactates are an interesting class of biodegradable polymers which may be made from either renewable or petroleum feedstocks. The synthesis of lactic acid raises real issues concerning the relative greenness of the renewable and non-renewable (HCN) route as discussed in Chapter 2. A summary comparison of the greenness of both routes is shown is Table 6.4. Without a full LCA the choice of route on environmental grounds is not easy and at least partly depends on plant location and raw material availability. [Pg.196]


See other pages where Green comparison is mentioned: [Pg.134]    [Pg.320]    [Pg.338]    [Pg.354]    [Pg.155]    [Pg.265]    [Pg.214]    [Pg.389]    [Pg.408]    [Pg.243]    [Pg.224]    [Pg.700]    [Pg.376]    [Pg.119]    [Pg.206]    [Pg.552]    [Pg.554]    [Pg.782]    [Pg.3]    [Pg.342]    [Pg.344]    [Pg.350]    [Pg.472]    [Pg.125]    [Pg.374]    [Pg.146]    [Pg.86]    [Pg.109]    [Pg.136]    [Pg.140]    [Pg.261]   
See also in sourсe #XX -- [ Pg.548 , Pg.549 , Pg.550 ]




SEARCH



Comparison Between Classical and Green Designs

© 2024 chempedia.info