Gray parts

Fig. 2. SEM-BSE image and EPMA maps from Esfordi deposit, a) White crystals in fractures are REE minerals, b). RE minerals (sketched by black colour) are interstitial to actinolite (gray parts), c) RE minerals (black) and apatite (white) EPMA map.

Fig. 7 Structures of the bPEI-g-lPEG copolymers. The black part of the structure represents the cationic branched PEI, and the gray part represents the nonionic linear PEG blocks. Reproduced with permission from [105]. Copyright 2002 ACS...

But hold on a minute longer. Look at the published V-I curve (the black part of Figure A-3). This represents a typical integrated switcher device, rated for 1.5A. The device is therefore supposed to function up to 100°C at 1.5 A. But does the curve extend all the way Not at all The 100°C is mysteriously truncated No other information is available in the datasheet. The only way out for us as designers is to try to extrapolate the V-I curve. See gray part. 

Figure 15. Metal-containing circular (a) or hairpin nucleic acids b-h). For each hairpin, the loop is within the gray part and the stem is within the white part of the figure.

Figure 12.8 shows several a/q lines obtained using different duty cycle values for the trapping rectangular waveform the gray parts represent those parts of the lines that fall within the region of stability for a given duty cycle the black parts represent those parts of the lines that fall beyond the p = 1 stability boundary. 

Fig. 17.22 TEM micrographs of ABS/PA6 nanocomposite with 4 % clay, (a) Low-magnification image, (b) high-magnification image, (c) schematic diagram for the co-continuous ABS/PA6 blend nanocomposite. The white part is the SAN phase, the gray part is the PA6 phase, the black particles are the butadiene rubber phase, and the dark line in the PA phase is the organoclay platelet in (a) and (b) (Li and Shimizu 2005)...

The light gray part of the excited state hypersurface (Fig. 14.27c) runs up to the dark gray part of the ground state hypersurface or vice versa. This means that photoexcitation (following the Franck-Condon rule this corresponds to a vertical excitation) means a profound change the system looks as if it has already reacted (photoreaction). 

Figure 4.27 Schematic diagrams of the morphological evolution for the PLA/PCL blend with increasing PCL concentrations. The white part is PCL phase and the gray part is PLA phase...

Radius of electrode Gray part IPMC (or electrode) and black part Nation (a) (b)... 

Gray part IPMC (orelectrode) and black part Nafion... 

Fig. 8. Schematic representation of a compartmentalized network. The gray part of the network represents the window between the compartments.

Clouded gray partly dissolved 3 100 " K Resin KR03 Phillips... 

SCHEME 1.8 Tryptophan-derived alkaloid biosynthetic pathways (gray parts monoteipenic units). 

---