Gravitation constant

The authors of this research selected units which could be written with maximum simplification to report their results. We must replace the factors which have canceled out. Assuming that the cgs system of units was used throughout, we note that possible units for H are grams per square centimeter and possible unts for C2 are grams per cubic centimeter, which yield the required units for n/c2 Note that these units of H must be multiplied by the gravitational constant to give H in dynes per square centimeter ... 

Head. The tme meaning of the total developed pump head, H, is the amount of energy received by the unit of mass per unit of time (14). This concept is traceable to compressors and fans, where engineers operate with enthalpy, a close relation to the concept of total energy. However, because of the almost incompressible nature of Hquids, a simplification is possible to reduce enthalpy to a simpler form, a Bernoulli equation, as shown in equations 1—3, where g is the gravitational constant, SG is specific gravity, y is the density equivalent, is suction head, is discharge head, and H is the pump head, ie, the difference between H, and H. 

Fig. 24. Generalized method using log scales for estimating packed column flooding and pressure drop, AP, in kPa/m g = gravitational constant, 9.81 m/s t = kinematic viscosity in mm /s (= cSt) E, G have units of kg/(m s) are in kg/m and the packing factor, F, in can be found in...

AT = average accelerating torque over the speed interval (difference between motor and load torque) g = gravitational constant WR -- torsional moment of inertia... 

Fv = valve tray F-factor, ft- /min/valve Fvm = valve tray F-factor at the beginning of the valve open region, fr /min/valve g = gravitational constant, ft/s he = clear liquid height, in. ho = dry tray pressure drop, in. 

X = distance film has fallen g = gravitational constant Pi = liquid density = latent heat of vaporization JL = liquid viscosity k = liquid thermal conductivity AT = temperature difference = (Tb bbi,p i -NrUj = local Nusselt number, h x/k, h = local heat transfer coefficient... 

---