Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Fretting corrosion temperature

The existence of corrosion forms typical of the oil and gas industry does not mean that this industry and the related infrastructures are not potentially subject to other forms of corrosion, such as general corrosion, galvanic corrosion, corrosion under deposit, crevice corrosion, intergranular corrosion, stress corrosion, corrosion fatigue, fretting corrosion, corrosion of welds, creep and high-temperature corrosion, lUifoim corrosion, and cathodic disbondment. [Pg.308]

Fretting corrosion is not a high-temperature oxidation phenomenon. This is demonstrated by increased damage at below-room temperatures by less... [Pg.183]

The fretting wear rate is directly proportional to the normal load for a given slip amplitude. However, in the total-slip situation, the frequency has little effect. (Water-house)88 In a partial-slip situation, the frequency of oscillation has little effect on wear rate per unit distance in the low-frequency range, whereas the increase in the strain rate at high frequencies leads to increased fatigue damage and increased corrosion due to a rise in temperature.75... [Pg.408]

See other pages where Fretting corrosion temperature is mentioned: [Pg.896]    [Pg.1333]    [Pg.517]    [Pg.182]    [Pg.184]    [Pg.1366]    [Pg.679]    [Pg.667]    [Pg.209]    [Pg.656]    [Pg.94]    [Pg.2715]    [Pg.473]    [Pg.1332]    [Pg.2715]    [Pg.57]    [Pg.59]    [Pg.842]    [Pg.506]    [Pg.1365]    [Pg.689]    [Pg.247]    [Pg.61]    [Pg.193]   
See also in sourсe #XX -- [ Pg.242 ]



SEARCH



FRET

Fretfulness

Fretting corrosion

Fretting corrosion temperature effects

© 2024 chempedia.info