Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Fracture surface of epoxy

Eig. 20. Scanning Electron Micrographs of the fracture surfaces of epoxy composites made with the same A carbon fiber with three different interphase conditions. Fracture is perpendicular to the... [Pg.26]

Analysis of the fracture surfaces of epoxy-polyimide via atomic force microscopic (AFM) analysis could reveal whether or not individual polyimide molecules are acting as fiber reinforcement. [Pg.133]

The linear-slope CDCB specimens shown in Figs. 13 and 14 were used for mode-I fracture tests on FRP-wood bonded interfaces under both dry and wet conditions. A typical specimen under mode-I fracture load is shown in Fig. 15 for phenolic FRP wood interface under dry conditions, and the corresponding critical tip load versus crack opening displacement is plotted in Fig. 16. As an illustration, the fracture surfaces of epoxy FRP-wood with HMR and RF primers on wood substrates are shown in Figs. 17 and 18,... [Pg.368]

Figure 17 Fracture surfaces of epoxy FRP-wood/HMR (specimen 7) under dry conditions. [Pg.370]

Figure 6.10a SEM photographs of the fracture surfaces of epoxy/HBP blend (15 wt% HBP) in castings form. Reprinted with permission from D. Ratna, Composites A, 2008, 39, 462. 2008, Elsevier Publishing Company... Figure 6.10a SEM photographs of the fracture surfaces of epoxy/HBP blend (15 wt% HBP) in castings form. Reprinted with permission from D. Ratna, Composites A, 2008, 39, 462. 2008, Elsevier Publishing Company...
Figure 4.17. SEM micrographs showing fracture surfaces of epoxy/VGCF nanocomposites with (a) 1.3 vol% PR-19-HHT and (b) 1.3 vol% oxygen plasma treated PR-19-PS [40]... Figure 4.17. SEM micrographs showing fracture surfaces of epoxy/VGCF nanocomposites with (a) 1.3 vol% PR-19-HHT and (b) 1.3 vol% oxygen plasma treated PR-19-PS [40]...
Fig. 5.80 An FESEM (5 kV) image of a whitened region from a three point bend fracture surface of epoxy modified with carboxyl-terminated butyl nitrile rubber (CTBN) particles. (From O. L. Shaffer, impublished [376].)... Fig. 5.80 An FESEM (5 kV) image of a whitened region from a three point bend fracture surface of epoxy modified with carboxyl-terminated butyl nitrile rubber (CTBN) particles. (From O. L. Shaffer, impublished [376].)...
Chaotic/Fractal Nature of phE and Fracture Surface of Epoxy< >... [Pg.400]

FIGURE 2.8 (a) Fracture surface of pristine epoxy resin, (b) Fracture surface of epoxy... [Pg.45]

Figure 17.1 Scanning electron micrographs of the fracture surface of epoxy polymer containing 9.6 vol% nanosilica (voids with nanoparticles are circled in the central image). Figure 17.1 Scanning electron micrographs of the fracture surface of epoxy polymer containing 9.6 vol% nanosilica (voids with nanoparticles are circled in the central image).
Figure 5. Fracture surface of epoxy resin containing (a) undispersed and (b) mechanically dispersed titanium dioxide nanoparticles (300 nm). Figure 5. Fracture surface of epoxy resin containing (a) undispersed and (b) mechanically dispersed titanium dioxide nanoparticles (300 nm).
Figure 5.38 The optical microphotograph of floccules on the fracture surface of epoxy polymer SCE-DADPS. Enlargement is 125x [138]... Figure 5.38 The optical microphotograph of floccules on the fracture surface of epoxy polymer SCE-DADPS. Enlargement is 125x [138]...
See other pages where Fracture surface of epoxy is mentioned: [Pg.217]    [Pg.425]    [Pg.334]    [Pg.314]    [Pg.345]    [Pg.136]    [Pg.270]    [Pg.300]    [Pg.206]    [Pg.45]    [Pg.389]   
See also in sourсe #XX -- [ Pg.400 ]



SEARCH



Epoxy fracture

© 2024 chempedia.info