Forging heat treatment quench

Summary of Pollutant Data for the Heat Treatment Quench Forging Subcategory Verification Data... 

Most other rotor parts in gas turbines are individually forged. This includes compressor wheels, spacers, distance pieces, and stub shafts. All are made from quenched and tempered low-alloy steels (Cr-Mo-V or Ni-Cr-Mo-V) with the material and heat treatment optimized for the specific part. The intent is to achieve the best balance of strength, toughness with ductility, processing and nondestructive evaluation capability, particularly when it is recognized that some... 

Effect of solution heat treatment temperature (1 h exposure terminated by water quenching) on the aged tensile properties of die forgings aged 3 h, 585 C (1085 °F), aircooled. 

Quenching. After solution treatment, the product is generally cooled to room temperature at such a rate to retain essentially all of the solute in solution. The central portions of thicker products caimot be cooled at a sufficient rate to prevent extensive precipitation in some alloys. Moreover, some forgings and castings are dehberately cooled slowly to minimize distortion and residual stress produced by differential cooling in different portions of the products. Cold water, either by immersion or by sprays, is the most commonly used cooling medium. Hot water or a solution of a polymer in cold water is used when the highest rates are not desired. Dilute Al—Mg—Si and Al—Mg—Zn extmsions can be effectively solution heat treated by the extmsion process therefore, they may be quenched at the extmsion press by either air or water. 

---