Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Electro-spun nanofiber membranes

Ghaee et al. [80] studied the adsorption property of copper and nickel on macroporous CS membranes. Batch adsorption experiments were carried out with mono- and bicomponent solutions on CS membrane. In monocomponent adsorption, the copper ion adsorption was 19.87 mg/g, which was higher than those of nickel (i.e., 5.21 mg/g). Maximum adsorptions for copper and nickel were 25.64 and 10.3 mg/g, respectively. Compared to monoadsorption, the amount of adsorption for individual component in bicomponent mixtures showed a decrease. That is due to the competitive adsorption and coordination site limitation. Aliabadi et al. [81] prepared electro-spun nanofiber membrane of PE oxide/CS for the adsorption of nickel, cadmium, lead, and copper ions from aqueous solutions. The maximum adsorption capacity of nickel, copper, cadmium, and lead ions by the PEO/CS nanofiber membrane followed the descending order nickel(II) > copper(II) > cadmium(II) > lead(II). [Pg.472]

Further experiments were then carried out with the 12 wt% electro-spun nanofiber membranes. [Pg.199]

Feng CY, Khulbe KC, Tabe S (2012) Volatile organic compound removal by membrtme gas stripping using electro-spun nanofiber membrane. Desalination 287 98-102... [Pg.354]

Feng C, Khulbe KC, Matsuura T, Tabe S, Ismail AF (2013) Preparation and cheiracterization of electro-spun nanofiber membranes and their possible applications in water treatment. Sep Puiif Technol 102 118-135... [Pg.354]

Feng, C., Khulbe, K.C., Matsuura, T., Tabe, S., Ismail, A.F., 2013, Preparation and cbaracterization of electro-spun nanofiber membranes and tbeir possible applications in water tteatment, Sep Puri Tech 102 118-135. [Pg.432]

Electrospinning is a remarkably simple method for producing nanofibers of a wide range of polymers, including fluoropolymers [37]. In a typical electrospinning process, nanofibers are generated by the electrostatic force and sol-gel reaction. The nanofiber can be deposited on a substrate to form a nonwoven membrane. Electro-spun nonwoven membranes have several unique properties, such as adjustable pore... [Pg.152]

Differential scanning calorimetry (DSC) measirrements were made in the temperature range of 40-160 °C. Electro-spun PAN nanofiber membranes had a glass transition temperature, T, of 90 °C. This is close to 85 °C, the value reported by the supplier. No value was obtainable in the range of temperatures tested for the... [Pg.193]

See other pages where Electro-spun nanofiber membranes is mentioned: [Pg.188]    [Pg.188]    [Pg.763]    [Pg.189]    [Pg.230]    [Pg.35]    [Pg.96]    [Pg.228]    [Pg.254]    [Pg.717]    [Pg.78]   
See also in sourсe #XX -- [ Pg.189 , Pg.199 ]



SEARCH



© 2024 chempedia.info