Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Compact tension test piece

Fig. 7.1. Compact tension test-piece [77], W = 20 mm, B = 4 mm the crack (length a) was introduced by tapping with a razor blade after cooling of the polymer with liquid nitrogen, if necessary... Fig. 7.1. Compact tension test-piece [77], W = 20 mm, B = 4 mm the crack (length a) was introduced by tapping with a razor blade after cooling of the polymer with liquid nitrogen, if necessary...
In treating adhesives as polymeric materials, it is possible to use Fracture-mechanics test specimens to determine material properties independent of geometry. A typical sample would be the compact tension test-piece, where a sheet of material, typically 6-mm thick and 100-mm square, has a sharp crack inserted in one edge. The sample is then loaded perpendicular to the plane of the crack and the load at which crack propagation... [Pg.532]

See other pages where Compact tension test piece is mentioned: [Pg.142]    [Pg.536]    [Pg.316]   
See also in sourсe #XX -- [ Pg.536 , Pg.547 ]



SEARCH



Compact tension

Compact tension test

Compaction tests

Pieces

Test pieces

© 2024 chempedia.info