Carbon diffusion, activation

Various carbon-based catalysts were tested in the investigated air gas-diffusion electrodes pure active carbon [6], active carbon promoted with silver [7] or with both silver and nickel. Catalysts prepared by pyrolysis of active carbon impregnated with a solution of the compound Co-tetramethoxyphenylporphyrine (CoTMPP) are also studied [8],... 

CHX and hydrocarbon wax are, respectively, the active intermediates formed by the hydrogenation of surface carbide and products of FTS formed by chain growth and hydrogenation of CHX intermediates. The hydrocarbon wax can contain molecules with the number of carbon atoms in excess of 100. Bulk carbide refers to a crystalline CoxC structure formed by the diffusion of carbon into bulk metal. Subsurface carbon may be a precursor to these bulk species and is formed when surface carbon diffuses into an octahedral position under the first surface layer of cobalt atoms. 

A PEFC consists of two electrodes in contact with an electrolyte membrane (Fig. 14.7). The membrane is designed as an electronic insulator material separating the reactants (H2 and 02/air) and allowing only the transport of protons towards the electrodes. The electrodes are constituted of a porous gas diffusion layer (GDL) and a catalyst (usually platinum supported on high surface area carbon) containing active layer. This assembly is sandwiched between two electrically conducting bipolar plates within which gas distribution channels are integrated [96]. 

Deposition of mineral matter is limited by diffusion of calcium and/or phosphorus to the site of deposition400-. Since the transfer of both compounds is enzymatically controlled (see p. 21) equilibrium relationships may change environmental settings critical for the deposition of minerals. For instance, by limiting carbonic anhydrase activity in one direction, a pool of H2C03 may build up at the site of deposition in the reverse situation HC03 will concentrate. As a consequence,... 

FIGURE 9.14 Dependence of the diffusion activation energy of carbon dioxide, methane, and propane in organosihcon polymers on the kinetic diameter of the penetrant molecules (designations of polymers are the same as in Figure 9.9). (From analysis of results presented in Semenova, S.I., J. Membr. Sci., 231, 189, 2004. With permission.)... 

---