Calcium alloys, pyrophoric

CALCIUM, metal and alloys pyrophoric 1903 60 DISINFECTANT, liquid, corrosive, n.o.s. 

In the presence of TMS-Cl the enediolate dianion and, importantly, the alkoxide ions, are trapped as their neutral silyl ethers (Scheme 5). This leads to much improved yields of the coupled product the acyloin is isolated in the form of its silyl enediol ether (3). Work-up is much easier. It is only necessary to filter the solution, evaporate the solvent, and isolate the product by distillation or chromatography. The TMS-Cl should be purified by distillation from calcium hydride, under a nitrogen or argon atmosphere, before use. A convenient procedure when using an organic solvent is to add the ester and the TMS-Cl together, dropwise, to the alkali metal finely dispersed in the solvent, at a rate sufficient to maintain the reaction. An explosion has been reported where this procedure was not followed. For a reaction conducted in liquid ammonia the TMS-Cl is added at the end of the reaction and after all the ammonia has been allowed to evaporate. Particularly in cases where sodium-potassium alloy has been used, a pyrophoric residue may have formed, so that the filtration must be carried out under an inert atmosphere. 

Calcium forms very hard white alloys with cerium. They are stable in the air and strongly pyrophoric. 

---