Board foot

Economics. The price of mbber modified flexible PVC foam ranges between about 2.00 to 3.00 per board foot ( 800—1200/m ) and that of unmodified, plasticized PVC foam is about 0.70 to 2.50 per board foot ( 300— 1000/m ) depending on the volume, thickness, and density of the product. 

Costs of ceUular plastic insulations are stiU higher than those of fibrous and other mass insulation types, but these can often be justified based on overall advantages of combined stmctural, thermal, and permeance properties. It is difficult to provide a single cost for each material type since there are many different forms of a material-based product avaUable and differing forms of manufacture and appHcation, often in combination with other materials. In the United States, EPS board costs on the order of 0.12 to 0.18 XEPS, 0.25 to 0.30 and PU, 0.30 to 0.35, per board foot ( 0.30/board ft fx 127/m ). 

Sawn lumber is commonly measured ia board feet. A board foot of lumber has a nominal dimension of 1 ft by 1 ft by 1 ia. (30.5 by 30.5 by 2.5 cm) and volume of 1/12 fT (2360 cm = 0.0024 ). The actual board foot dimension and volume is often smaller, however. Paper and paperboard products... 

Epidermabrasion is a physical process that removes horny skin using a mechanical aid. Several gently abrasive materials and appliances are available, including emery boards, foot files, pumice stones and synthetic pumice-like blocks. 

Board foot- A unit of measure for lumber equal to 1 inch thick by 12 inches wide by 12 inches long. Examples 1" x 12" x 16 = 16 board feet, 2" x 12" x 16 = 32 board feet... 

Board foot A unit of cubic content, used in measuring lumber equal in volume to a piece Ift and lin. thick, or 2360 cm. ... 

Hardwoods are measured and sold by the board foot, which is 1 foot long, 1 foot wide, and 1 inch thick. For your project, you may need a board of 1 x 10 of a certain length—in that case, skip to the next section and just go buy it. You can say, I d like an eight-foot, one-by-ten pine board. More complex projects, especially those that require widths other than the standard 1-inch thickness, may require ordering in board feet. Here s how to figure it out. 

---