Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Beta titanium alloys

W. J. Evans. Optimising mechanical properties in alpha + beta titanium alloys. Mater Sci Eng A 243 %%, 1998. [Pg.924]

It is shown here that alpha, beta and alpha-beta titanium alloys can be friction stir welded. The phase transformations that occur in the nugget region and the heat affected zone are discussed. Residual stresses were found to be quite high in the present work. Tensile properties in transverse direction were... [Pg.399]

Perng TP, Altstetter CJ. On the effective hydrogen permeability in metastable beta titanium alloy, niobium and 2.25cr-l mo ferritic steel. Metall Trans. 19 17A 2086. [Pg.199]

O.M. Ivasishin, P.E. Markovsky, Y.V. Matviychuk, and S.L. Semiatin, Precipitation and Recrystallization Behavior of Beta Titanium Alloys During Continuous Heat Treatment, Metall. Mater. Trans. A, Vol 34, 2003, p 147-158... [Pg.154]

M. A. Gaudett, J. R. Scully, Environmentally Assisted Cracking of High Strength Beta Titanium Alloys, Report to the Office of Naval Research, Grant No. N000014-91-J-4164,1994. [Pg.154]

Steinemann, S.G., Mausli, P.-A., Szmukler-Moncler, S., Semlitsch, M., Pohler, O., Hintermann, H.-E. and Perren, S.M. (1993) Beta-Titanium Alloy for Surgical Implants, Proc. of the 7th World Conf. on Titanium, pp. 2689-2696. [Pg.198]

S] Kolman, D. G. and Scully, J. R. On the Requirement for a Sharp Notch or Precrack to Cause Environmentally Assisted Crack Initiation In Beta Titanium Alloys Exposed to Aqueous Chloride Environments, ASTM STP 1298, ASTM International, West Conshohocken, PA, pp. 61-73. [Pg.301]

Young, L. M., "Environment-Assisted Cracking in Beta Titanium Alloys, M.S. thesis, University of Virginia, Charlottesville, VA, 1993. [Pg.320]

F 620, Specification for Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants... [Pg.504]

H.-T. Chen, C.-H. Hsiao, H.-Y. Long, C.-J. Chung, C.-H. Tang, K.-C. Chen, and J.-L. He, Micro-arc oxidation of [beta]-titanium alloy Structural characterization and osteoblast compatibility, Surf. Coat Technol, 204, 1126-31 (2009). [Pg.126]

Deformation Textures and Microstructures in Alpha- and Beta-Titanium Alloys... [Pg.36]

Rack, H.J., Dynamic Strain Aging of Metastable Beta Titanium Alloys, Sen Metall.,Wo 9,1975, p. 829-831... [Pg.78]

Note Rationales behind these treatments are described by T.K. Redden in Beta Titanium Alloys in the 1980 s, R.R. Boyer and H.W. ... [Pg.269]

G.W. Kuhlmanef oZ., "Characterization of Ti-6-22-22S AHigh-Streng Alpha-Beta Titanium Alloy for Fracture Critical AppKcations, Proc. 7th Lot. Titanium Conf, San Diego, TMS/AIME, June 1992, to be published... [Pg.366]

Note Forgings were processed at 30 °C (50 °F) above the P transus temperature, 30 min, fan cooled+40 °C (70 °F) below the P transus, 1 h, AC + 540 °C (1000 °F), 8 h. Source G.W. Kuhlman et aL, "Charactmization ofTi-6-22-22S High-Strength Alpha-Beta Titanium Alloy for Fracture Critical Applications, Proc. 7th Int. Titanium Conf., San Diego, TMS/AIME, June 1992, to be published... [Pg.372]

Source L Rosales, K. Ono, A. Somer and UV. Lee, Microstructures and Mechanical Properties of Thennomechanicaly Treated High-Strengih Beta-Titanium Alloys, North American Rockwell Corporation Report NA-72-232, Feb 1972 reported ki Beta Vta-nitmABoys, R.Wood, Ed., MCIC-72-11,1972, p 118... [Pg.419]

See other pages where Beta titanium alloys is mentioned: [Pg.347]    [Pg.347]    [Pg.347]    [Pg.152]    [Pg.400]    [Pg.403]    [Pg.154]    [Pg.154]    [Pg.1852]    [Pg.305]    [Pg.305]    [Pg.291]    [Pg.601]    [Pg.837]    [Pg.374]    [Pg.205]    [Pg.218]    [Pg.264]    [Pg.264]    [Pg.265]    [Pg.266]    [Pg.266]    [Pg.382]    [Pg.414]    [Pg.417]    [Pg.422]    [Pg.423]    [Pg.423]   
See also in sourсe #XX -- [ Pg.305 ]



SEARCH



Alloying titanium

Alpha-beta titanium alloys

Beta alloys

Titanium alloyability

© 2024 chempedia.info