Basicentric coordinate systems

Orientation of Sensors. Tissue-, interface-, and structure-mounted sensors may be aligned as closely as possible with the axes of a biodynamic coordinate system (see, for example, Fig. 10.2), even though these may have inaccessible origins that are anatomical sites within the body. In practice, sensors are commonly oriented to record the component accelerations defined by the basicentric coordinate systems shown in Fig. 10.2 (ISO 2631-1, 1997 ISO 5349-1,2001), which have origins at the interface between the body and the vibrating surface. The location of accelerometers to record the handle vibration of specific power tools is described in an international standard (ISO 5349-2, 2001). 

Mechanical Impedance of the Hand-Arm System. The idealized mechanical input impedance of the hand-arm system when the hand is gripping a cylindrical or oval handle has been derived for the three directions of the basicentric coordinate system shown in Fig. 10.2 (ISO 10068,1998). The transmissibility of vibration through the hand-arm system has not been measured with noncontact or lightweight transducers satisfying the conditions described in Sec. 10.2.1. However, it has been demonstrated that the transmissibility from the palm to the wrist when a hand grips a vibrating handle is unity at frequencies up to 150 Hz (Boileau et al., 1992). 

---