Amination alkenyl

A(-(Arylthiomethyl)amines, which are easily prepared and reportedly have better shelf stability than the corresponding )V-(alkoxymethyl)amines, have also been utilized to prepare tertiary amines. Alkenyl cuprate addition to )V,A -diethylphenylthiomethylamine produces allylic amines in high yield (entry 1, Table 6). Both alkenyl groups of the cuprate react. 5-(Dialkylaminomethyl) dithiocarbamates (entry 2, Table 6), sulfonates (entry 3, Table 6) and amides also generate iminium salts in situ. Of a variety of amides examined, imides such as dialkylaminomethyl-succinimides (entry 4, Table 6) and -phthali-mides provide the best overall yields. Organolithium reagents are rarely utilized in aminomethylation reactions. However, )V-chloromethylamines condense readily with lithiated anisole derivatives (entry S, Table 6). ... 

In the mid 1990s Petasis reported three-component coupling reactions of boronic acids, amines, and aldehydes as a general approach to optically active secondary amines. Alkenyl boronic acids were shown conveniently to undergo addition to iminium ions formed in situ under mild conditions from amines and aldehydes (Scheme 11.9) [65]. For example, a mixture consisting of vinylboronic acid 64, (S)-2-phenylglycinol (65), and aldehyde 66 furnishes 67 in 78 % yield and >99 1 dr. 

In the reaction of aryl and alkenyl halides with 1,3-pentadiene (248), amine and alcohol capture the 7r-allylpalladium intermediate to form 249. In the reactions of o-iodoaniline (250) and o-iodobenzyl alcohol (253) with 1,3-dienes, the amine and benzyl alcohol capture the Tr-allylpalladium intermediates 251 and 254 to give 252 and 255[173-175]. The reaction of o-iodoaniline (250) with 1,4-pen tadiene (256) affords the cyclized product 260 via arylpalladiuni formation, addition to the diene 256 to form 257. palladium migration (elimination of Pd—H and readdition to give 258) to form the Tr-allylpalladium 259, and intramolecular displacement of Tr-allylpalladium with the amine to form 260[176], o-Iodophenol reacts similarly. 

The formation of disubstituted alkynes by coupling of terminal alkynes, followed by intramolecular attack of an alcohol or amine, is used for the preparation of benzofurans and indoles. The benzo[il)]furan 356 can be prepared easily by the reaction of o-iodophenol with a terminal alkyne[262]. The 2-substituted indole 358 is prepared by the coupling of 2-ethynylaniline (357) with aryl and alkenyl halides or triflates, followed by Pd(ll)-catalyzed cycliza-tion[263]. 

The carbonyiation of o-diiodobenzene with a primary amine affords the phthalimide 501 [355,356]. Carbonyiation of iodobenzene in the presence of (9-diaminobenzene (502) and DBU or 2,6-lutidine affords 2-phenylbenzimida-zole (503)[357, The carbonyiation of aryl iodides in the presence of pentaflnor-oaniline affords 2-arylbenzoxazoles directly, 2-Arylbenzoxazole is prepared indirectly by the carbonyiation of (9-aminophenol[358j. The optically active aryl or alkenyl oxazolinc 505 is prepared by the carbonyiation of the aryl or enol triflates in the presence of the opticaly active amino alcohol 504, followed by treatment with thionyl chloride[359]. 

The rather unreactive chlorine of vinyl chloride can be displaced with nucleophiles by the catalytic action of PdCb. The conversion of vinyl chloride to vinyl acetate (797) has been studied extensively from an industrial standpoint[665 671]. DMF is a good solvent. 1,2-Diacetoxyethylene (798) is obtained from dichloroethylene[672]. The exchange reaction suffers steric hindrance. The alkenyl chloride 799 is displaced with an acetoxy group whereas 800 and 801 cannot be displaccd[673,674]. Similarly, exchange reactions of vinyl chloride with alcohols and amines have been carried out[668]. 

The product of this dehydration is an alkenyl substituted amine or enamine... 

Reaction of 3-formyl-2-[A-(2-alkenyl)-A-benzylamino]-4//-pyrido[l, 2-n]-pyrimidin-4-ones 252 and primary amines in the presence of MS (4 A) afforded pyrido[l, 2 l,2]pyrimido[4,5-Z)]azepin-6-ones 253 (96T13081). 

McDowell and Stirling194 studied electronic effects upon the reactivity of aryl vinyl sulfones towards amines. Rate constants for t-butylamine addition in ethanol at 25 °C were well correlated by the Hammett equation, with p = 1.59. Comparison of this with p values for H-D exchange mentioned above191 suggested considerable carbanionic character in the transition state, perhaps in a concerted mechanism. Rates of addition of amines to alkenyl, allenyl and alkynyl p-tolyl sulfones have also been measured195. 

Reduction of iV-(3-bromopropyl) imines gives a bromo-amine in situ, which cyclizes to the aziridine. Five-membered ring amines (pyrrolidines) can be prepared from alkenyl amines via treatment with N-chlorosuccinimide (NCS) and then BusSnH. " Internal addition of amine to allylic acetates, catalyzed by Pd(PPh3)4, leads to cyclic products via a Sn2 reaction. Acyclic amines can be prepared by a closely related reaction using palladium catalysts. Three-membered cyclic amines (aziridines)... 

Pr)4, " borohydride-exchange resin,and formic acid. When the last is used, the process is called the Wallach reaction. Conjugated aldehydes are converted to alkenyl-amines with the amine/silica gel followed by reduction with zinc borohydride.In the particular case where primary or secondary amines are reductively methylated with formaldehyde and formic acid, the method is called the Esch-weiler-Clarke procedure. It is possible to use ammonium (or amine) salts of formic acid, " or formamides, as a substitute for the Wallach conditions. This method is called the Leuckart reaction,and in this case the products obtained are often the N-formyl derivatives of the amines instead of the free amines. Primary and secondary amines can be iV-ethylated (e.g., ArNHR ArNREt) by treatment with NaBH4 in acetic acid. Aldehydes react with aniline in the presence of Mont-morillonite KIO clay and microwaves to give the amine. Formaldehyde with formic acid converts secondary amines to the N-methyl derivative with microwave irradiation. 

Subshtuted 3-alken-l-ynes can be hydroaminated with primary or secondary aliphahc or aromatic amines at the alkynyl sites or at the alkynyl and at the alkenyl sites in the presence of Hg(ll) salts. However, the reachon is essentially stoichiometric in nature, even if the mercury compound can be recycled without apparent loss of achvity [262-264]. 

The original conditions used amines as solvents or cosolvents. Several other bases can replace the amine. Tetrabutylammonium hydroxide or fluoride can be used in THF (see Entry 1 in Scheme 8.11).163 Tetrabutylammonium acetate is also effective with aryl iodides and EWG-substituted aryl bromides (Entry 2).164 Use of alkenyl halides in this reaction has proven to be an effective method for the synthesis of enynes165 (see also Entries 5 and 6 in Scheme 8.11). 

Iminium ions are reactive electrophiles toward both alkenyl and allylic silanes. Useful techniques for closing nitrogen-containing rings are based on in situ generation of iminium ions from amines and formaldehyde.121... 

A typical second step after the insertion of CO into aryl or alkenyl-Pd(II) compounds is the addition to alkenes [148]. However, allenes can also be used (as shown in the following examples) where a it-allyl-r 3-Pd-complex is formed as an intermediate which undergoes a nucleophilic substitution. Thus, Alper and coworkers [148], as well as Grigg and coworkers [149], described a Pd-catalyzed transformation of o-iodophenols and o-iodoanilines with allenes in the presence of CO. Reaction of 6/1-310 or 6/1-311 with 6/1-312 in the presence of Pd° under a CO atmosphere (1 atm) led to the chromanones 6/1-314 and quinolones 6/1-315, respectively, via the Jt-allyl-r 3-Pd-complex 6/1-313 (Scheme 6/1.82). The enones obtained can be transformed by a Michael addition with amines, followed by reduction to give y-amino alcohols. Quinolones and chromanones are of interest due to their pronounced biological activity as antibacterials [150], antifungals [151] and neurotrophic factors [152]. 

In one example of application of the RCM strategy, summarized in Scheme 107, the key intermediate 454 was obtained from 451 by sequential Wittig methylenation to 452, reductive iV-deprotection to 453, and introduction of an alkenyl chain onto the secondary amine. The RCM reaction of 454 to 455 proceeded in quantitative yield in the presence of the second-generation Grubbs catalyst <20040L965>. 

When one of the substituents on the amine nitrogen atom is ready to trap a radical formed by treatment of iV-(a-aminoalkyl)benzotriazole with Sml2, cyclization may occur. Such a situation is depicted in Scheme 102. Thus, (4-penten-l-yl)amine derivative 652 is reduced to radical 653 that is then rapidly trapped by the alkenyl group and... 

Interestingly, the alkenylation of sp3 C-H bond is observed in the iridium-catalyzed coupling reaction of aldehydes, amines, and alkynes (Equation (56)).62... 

Most of the work on the C-N bond-forming crosscoupling reactions has concentrated on the formation of aromatic C-N bonds. Recent studies show that the application of cross-coupling reactions to alkenyl halides or triflates furnished enamines (Scheme 19) (for palladium-catalyzed reaction, see 28,28a-28d, and for copper-catalyzed reaction, see 28e-28g). Brookhart et al. studied the palladium-catalyzed amination of 2-triflatotropone 109 for the synthesis of 2-anilinotropone 110.28 It was found that the reaction of 109 proceeded effectively in the presence of racemic BINAP and a base. As a simple method for the synthesis of enamines, the palladium-catalyzed reactions of alkenyl bromide 111 with secondary amine were achieved under similar conditions.2841 The water-sensitive enamine 112 was isolated as pure compound after dilution with hexane and filtration through Celite. The intramolecular cyclization of /3-lactam 113, having a vinyl bromide moiety, was investigated by Mori s... 

---