Alumina conversion

Dehydration is carried out at atmospheric pressure and between 250 and 300°C, on alumina. Conversion is virtually total. A number of by-products are retained by water scrubbing. The catalyst is easily regenerated by the combustion of carbon deposits. 

The formation of copredpitates has been observed onto all yalumina samples which were tested independently of their purity, thermal pretreatment and spedfic surface area. Aluminas of high purity were prepared in this work and were found to behave similarly as commerdal samples. Thus, the formation of copredpitates is not related to the presence of impurities in alumina. Conversely, the rate of ion deposition was found to be very dependant on the aliunina characteristics, in particular the spedfic surface area, possibly the impurity level. 

Salter mentions that red lead was frequently adulterated with earthy substances, such as brickdust, red ochre, and colcothar . Various additives are also mentioned by Toch, including silica, lampblack, graphite qq.v.) and silicate of alumina. Conversely, this compound has not infrequently been used to adulterate vermilion q.v. Gettens et al., 1993b). 

The discrepancy between the pore area or the core area on the one hand and the BET area on the other is proportionately larger with silica than with alumina, particularly at the higher degrees of compaction. The fact that silica is a softer material than alumina, and the marked reduction In the BET area of the compact as compared with that of the loose material, indicates a considerable distortion of the particles, with consequent departure of the pore shape from the ideal of interstices between spheres. The factor R for cylinders (p. 171), used in the conversion to pore area in the absence of a better alternative, is therefore at best a crude approximation. 

Dual Function Catalytic Processes. Dual-function catalytic processes use an acidic oxide support, such as alumina, loaded with a metal such as Pt to isomerize the xylenes as weH as convert EB to xylenes. These catalysts promote carbonium ion-type reactions as weH as hydrogenation—dehydrogenation. In the mechanism for the conversion of EB to xylenes shown, EB is converted to xylenes... 

Mobil s Low Pressure Isomerization Process (MLPI) was developed in the late 1970s (123,124). Two unique features of this process are that it is Operated at low pressures and no hydrogen is used. In this process, EB is converted to benzene and diethylbenzene via disproportionation. The patent beheved to be the basis for the MLPI process (123) discusses the use of H-ZSM-5 zeoHte with an alumina binder. The reaction conditions described are start-of-mn temperatures of 290—380°C, a pressure of 273 kPa and WHSV of 5—8.5/h. The EB conversion is about 25—40% depending on reaction conditions, with xylene losses of 2.5—4%. The PX approach to equiHbrium is about 99 ndash 101%. The first commercial unit was Hcensed in 1978. A total of four commercial plants have been built. 

A second Mobil process is the Mobil s Vapor Phase Isomerization Process (MVPI) (125,126). This process was introduced in 1973. Based on information in the patent Hterature (125), the catalyst used in this process is beHeved to be composed of NiHZSM-5 with an alumina binder. The primary mechanism of EB conversion is the disproportionation of two molecules of EB to one molecule of benzene and one molecule of diethylbenzene. EB conversion is about 25—40%, with xylene losses of 2.5—4%. PX is produced at concentration levels of 102—104% of equiHbrium. Temperatures are in the range of 315—370°C, pressure is generally 1480 kPa, the H2/hydrocatbon molar ratio is about 6 1, and WHSV is dependent on temperature, but is in the range of 2—50, although normally it is 5—10. 

The reaction is generally carried out at atmospheric pressure and at 350—400°C. A variety of catalysts, eg, bases and metal salts and oxides on siUca or alumina—sihcates, have been patented (86—91). Conversions are in the 30—70% range and selectivities in the 60—90% range, depending on the catalyst and the ratio of formaldehyde to acetate. 

Disposal. Fluorine can be disposed of by conversion to gaseous perfluorocarbons or fluoride salts. Because of the long atmospheric lifetimes of gaseous perfluorocarbons (see Atmospheric models), disposal by conversion to fluoride salts is preferred. The following methods are recommended scmbbing with caustic solutions (115,116) reaction with soHd disposal agents such as alumina, limestone, lime, and soda lime (117,118) and reaction with superheated steam (119). Scmbbing with caustic solution and, for dilute streams, reaction with limestone, are practiced on an industrial scale. 

The conversion of CO to CO2 can be conducted in two different ways. In the first, gases leaving the gas scmbber are heated to 260°C and passed over a cobalt—molybdenum catalyst. These catalysts typically contain 3—4% cobalt(II) oxide [1307-96-6] CoO 13—15% molybdenum oxide [1313-27-5] MoO and 76—80% alumina, JSifDy and are offered as 3-mm extmsions, SV about 1000 h . On these catalysts any COS and CS2 are converted to H2S. Operating temperatures are 260—450°C. The gases leaving this shift converter are then scmbbed with a solvent as in the desulfurization step. After the first removal of the acid gases, a second shift step reduces the CO content in the gas to 0.25—0.4%, on a dry gas basis. The catalyst for this step is usually Cu—Zn, which may be protected by a layer of ZnO. 

Benzene-Based Catalyst Technology. The catalyst used for the conversion of ben2ene to maleic anhydride consists of supported vanadium oxide [11099-11-9]. The support is an inert oxide such as kieselguhr, alumina [1344-28-17, or sUica, and is of low surface area (142). Supports with higher surface area adversely affect conversion of benzene to maleic anhydride. The conversion of benzene to maleic anhydride is a less complex oxidation than the conversion of butane, so higher catalyst selectivities are obtained. The vanadium oxide on the surface of the support is often modified with molybdenum oxides. There is approximately 70% vanadium oxide and 30% molybdenum oxide [11098-99-0] in the active phase for these fixed-bed catalysts (143). The molybdenum oxide is thought to form either a soUd solution or compound oxide with the vanadium oxide and result in a more active catalyst (142). 

The reaction of methyl propionate and formaldehyde in the gas phase proceeds with reasonable selectivity to MMA and MAA (ca 90%), but with conversions of only 30%. A variety of catalysts such as V—Sb on siUca-alumina (109), P—Zr, Al, boron oxide (110), and supported Fe—P (111) have been used. Methjial (dimethoxymethane) or methanol itself may be used in place of formaldehyde and often result in improved yields. Methyl propionate may be prepared in excellent yield by the reaction of ethylene and carbon monoxide in methanol over a mthenium acetylacetonate catalyst or by utilizing a palladium—phosphine ligand catalyst (112,113). 

Because the synthesis reactions are exothermic with a net decrease in molar volume, equiUbrium conversions of the carbon oxides to methanol by reactions 1 and 2 are favored by high pressure and low temperature, as shown for the indicated reformed natural gas composition in Figure 1. The mechanism of methanol synthesis on the copper—zinc—alumina catalyst was elucidated as recentiy as 1990 (7). For a pure H2—CO mixture, carbon monoxide is adsorbed on the copper surface where it is hydrogenated to methanol. When CO2 is added to the reacting mixture, the copper surface becomes partially covered by adsorbed oxygen by the reaction C02 CO + O (ads). This results in a change in mechanism where CO reacts with the adsorbed oxygen to form CO2, which becomes the primary source of carbon for methanol. 

Diphenylamine can also be produced by passing the vapors of aniline over a catalyst such as alumina, or alumina impregnated with ammonium fluoride (17). The reaction is carried out at 480°C and about 700 kPa (7 atm). Conversion per pass, expressed as parts diphenylamine per 100 parts of reactor effluent, is low (18—22%), and the unconverted aniline must be recycled. Other catalysts disclosed for the vapor-phase process are alumina modified with boron trifluoride (18), and alumina activated with boric acid or boric anhydride (19). 

Dutch State Mines (Stamicarbon). Vapor-phase, catalytic hydrogenation of phenol to cyclohexanone over palladium on alumina, Hcensed by Stamicarbon, the engineering subsidiary of DSM, gives a 95% yield at high conversion plus an additional 3% by dehydrogenation of coproduct cyclohexanol over a copper catalyst. Cyclohexane oxidation, an alternative route to cyclohexanone, is used in the United States and in Asia by DSM. A cyclohexane vapor-cloud explosion occurred in 1975 at a co-owned DSM plant in Flixborough, UK (12) the plant was rebuilt but later closed. In addition to the conventional Raschig process for hydroxylamine, DSM has developed a hydroxylamine phosphate—oxime (HPO) process for cyclohexanone oxime no by-product ammonium sulfate is produced. Catalytic ammonia oxidation is followed by absorption of NO in a buffered aqueous phosphoric acid... 

A selective poison is one that binds to the catalyst surface in such a way that it blocks the catalytic sites for one kind of reaction but not those for another. Selective poisons are used to control the selectivity of a catalyst. For example, nickel catalysts supported on alumina are used for selective removal of acetjiene impurities in olefin streams (58). The catalyst is treated with a continuous feed stream containing sulfur to poison it to an exacdy controlled degree that does not affect the activity for conversion of acetylene to ethylene but does poison the activity for ethylene hydrogenation to ethane. Thus the acetylene is removed and the valuable olefin is not converted. 

Gas Phase. The gas-phase methanol hydrochlorination process is used more in Europe and Japan than in the United States, though there is a considerable body of Hterature available. The process is typicaHy carried out as foHows vaporized methanol and hydrogen chloride, mixed in equimolar proportions, are preheated to 180—200°C. Reaction occurs on passage through a converter packed with 1.68—2.38 mm (8—12 mesh) alumina gel at ca 350°C. The product gas is cooled, water-scmbbed, and Hquefied. Conversions of over 95% of the methanol are commonly obtained. Garnma-alurnina has been used as a catalyst at 295—340°C to obtain 97.8% yields of methyl chloride (25). Other catalysts may be used, eg, cuprous or zinc chloride on active alumina, carbon, sHica, or pumice (26—30) sHica—aluminas (31,32) zeoHtes (33) attapulgus clay (34) or carbon (35,36). Space velocities of up to 300 h , with volumes of gas at STP per hour per volume catalyst space, are employed. 

---