Actinium oxides

The metallic ion of actinium has an oxidation state of +3. Two examples of Ac compounds follow ... 

Americium, californium, and einsteinium oxides have been reduced by lanthanum metal, whereas thorium has been used as the reductant metal to prepare actinium, plutonium, and curium metals from their respective oxides. Berkelimn metal could also be prepared by Th reduction of Bk02 or Bk203, but the quantity of berkelium oxide available for reduction at one time has not been large enough to produce other than thin foils by this technique. Such a form of product metal can be very difficult to handle in subsequent experimentation. The rate and yield of Am from the reduction at 1525 K of americium dioxide with lanthanum metal are given in Fig. 2. 

In principle, a promising method for the preparation of Ac metal is the tantalothermic reduction of AcC, as described generally in Section II,C. This method has not been tried as yet, however, so the metallothermic reduction of an actinium halide or oxide remains the only proved method. 

I he atomic wcighi varies because of natural variations in the isotopic composition of the element, caused by the various isotopes having different origins - I h is the end product of the thorium decay scries, while Ph and " Pb arise Irom uranium as end products of the actinium and radium series respectively. Lead-204 has no existing natural radioactive precursors. Electronic configuration l.v 2s lfc22/j"3v 3//,3i/l"4v- 4/, 4l/" 4/ IJ5v- 5/ "5t/l"bv />-. Ionic radius Pb I.IX A. Pb 1 0.7(1 A. Metallic radius 1.7502 A. Covalent radius (ip i 1.44 A. First ionization potential 7.415 cV second. 14.17 eV. Oxidation... 

The high oxidation states of metal ions occurring at the beginning of the transition and actinium series usually are found in complex oxycations of the types MO + and M0 +. The remarkable... 

The general chemistry of Ac3 in both solid compounds and solution, where known, is very similar to that of lanthanum, as would be expected from the similarity in position in the Periodic Table and in radii (Ac3, 1.10 La3, 1.06 A) together with the noble gas structure of the ion. Thus actinium is a true member of Group 3, the only difference from lanthanum being in the expected increased basicity. The increased basic character is shown by the stronger absorption of the hydrated ion on cation-exchange resins, the poorer extraction of the ion from concentrated nitric acid solutions by tributyl phosphate, and the hydrolysis of the trihalides with water vapor at 1000°C to the oxohalides AcOX the lanthanum halides are hydrolyzed to oxide by water vapor at 1000°C. 

Actinium forms halides only in the (+3) oxidation state, AcXs and AcOX (X = F, Cl, Br). The trihalides have the LaFs (X = F) and UCI3 (X = Cl, Br) structures, respectively. 

---