Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Abrasive wear gouging

Abrasive wear can be classified into three types. Gouging abrasion is a high stress phenomenon that is likely to be accomplished by high comprehensive stress and impact. Grinding abrasion is a high stress abrasion that pulverizes fragments of the abrasive that become sandwiched between metal faces. And erosion is a low-stress scratching abrasion. [Pg.269]

Wear Gouging, abrasion, May show Wear debris and/or... [Pg.153]

The majority of engineering materials are heterogeneous, composed of phases with considerable differences in hardness. When an abrasive particle is small, the presence of coarse, hard, phases in these alloys can considerably strengthen the material s resistance to abrasive wear. But if the abrasive particle size is comparable to the scale of heterogeneity of the material, then gouging out the hard material from the structure leads to an increased wear rate. Abrasion can be limited by ... [Pg.80]

Wear In case of gouging and abrasion check source of abrasives evaluate affectiveness of lubricants Failure of seals of filters fretting induced by looseness in clamped joints subject to vibration bearing or proper design may lessen or eliminate the failure water contamination High velocities or uneven flow, cavitation... [Pg.154]


See other pages where Abrasive wear gouging is mentioned: [Pg.295]    [Pg.428]    [Pg.454]    [Pg.124]    [Pg.1829]    [Pg.269]    [Pg.1588]    [Pg.297]    [Pg.2292]    [Pg.269]    [Pg.40]    [Pg.2275]    [Pg.1833]    [Pg.50]    [Pg.9]    [Pg.202]   
See also in sourсe #XX -- [ Pg.57 , Pg.59 ]




SEARCH



Gouges

© 2024 chempedia.info