63Ni source

A solid or liquid sample can be introduced to the analyzer by thermal desorption. The resultant vapors are swept through the inlet by the carrier gas and ionized by a radioactive 63Ni source. Discreet packets of ions are then pulsed down the flight tube under a controlled potential. The arrival of the ions at the detector is inversely proportional to the mass of the molecule. Thus, the smaller ions arrive at the detector first, and the larger ions arrive later. At that point the signal is amplified and read out via an appropriate computer interface. Both commercially available instruments are capable of generation and detection of both positive and negative ions. 

I, sample injector 2, thermostat 3, multi-capillary column 4, ionization chamber 5, 63Ni source of beta radiation 6, field inlet 7, separation chamber 8, electrodes 9, drift voltage generator 10, electrometer and... 

An ion mobility spectrometer consists of a sample-introduction device a drift tube where ionisation and separation of ions takes place and a detector. Ionisation sources of choice include radioactive sources (e.g. a 63Ni foil), photoionisation methods, corona-spray ionisation, flame ionisation and corona discharge. The most common detection method used to measure the... 

---